2010

Walk Mode
In walk mode, you can navigate through a model as if you were walking through it. In this mode, the up direction
is always maintained.
Once you start walk mode, the cursor changes to the walk cursor. To walk through the model, you drag in the
direction in which you want to move in.
To use walk mode to move through the model
1 Click Walk
on the Navigation Mode toolbar.
2 To move, hold down the left mouse button as you drag in the direction you want to walk, or use the cursor
keys. The camera spins left and right, and moves forwards and backwards.
NOTE Holding down the SHIFT key speeds up this movement.
3 To glide, hold down the CTRL key as you drag the mouse. The camera glides left and right and up and
down.
As walk mode is camera-centric, this mode differs from the normal pan mode in that the camera is moved
rather than the model.
4 To tilt the camera up and down, spin the mouse wheel.
Menu: Viewpoint ➤ Navigation Mode ➤ Walk
Command entry: CTRL + 2
Look Around Mode
In look around mode, you can rotate the current view vertically and horizontally. When rotating the view, your
line of sight rotates about the current eye position, like turning your head.
To look around a view
1 Click Look Around
on the Navigation Mode toolbar.
2 To look around, drag the left mouse button, or use the cursor keys. The camera looks left, right, up or down.
NOTE Holding down the SHIFT key speeds up this movement.
3 To rotate the camera around its viewing axis, hold down the CTRL key.
52 | Chapter 6 Explore Your Model