2010

3 Click OK.
To automatically fit the model after a view orientation
1 Right-click the ViewCube tool, and click ViewCube Options.
2 In the Options Editor, the ViewCube page under the Interface node, select Fit-to-View on Change.
3 Click OK.
To roll a face view
NOTE Make sure a face view is displayed.
■ Click one of the roll arrows displayed above and to the right of the ViewCube tool.
The left roll arrow rotates the view 90 degrees counterclockwise; the right roll arrow rotates the view 90
degrees clockwise.
To define the front view
■ Right-click the ViewCube tool, and click Set Current View as Front.
80 | Chapter 6 Explore Your Model