2011

To use Fly mode to move through the model
1 Click Fly
on the Navigation Mode toolbar.
2 Hold down the left mouse button to move the camera forward. As in a flight simulator, the left mouse
button banks left/right when dragged left or right and tilts up/down when dragged up or down.
NOTE Holding down the SHIFT key speeds up this movement.
3 Use the up and down cursor keys to zoom the camera in and out respectively; use the left and right cursor
keys to spin the camera left and right respectively.
NOTE Holding down the CTRL key rotates the camera around its viewing axis, while still moving forward.
Menu: Classic user interface: Viewpoint ➤ Navigation Mode ➤ Fly
Command entry: CTRL + 9
Turntable Mode
In Turntable mode, you can spin the model around the up vector as though the model is sitting on a turntable.
In this mode, the up direction is always maintained.
To spin model on a turntable
1 On the navigation bar, click Turntable
on the Navigation Mode toolbar.
2 Drag the left mouse button left and right, or use the left and right cursor keys, to spin the turntable left and
right respectively.
NOTE Holding down the SHIFT key or spinning the mouse wheel, temporarily enables normal Zoom mode.
Holding down the CTRL key, temporarily enables normal Pan mode.
3 To tilt the turntable up and down, spin the mouse wheel, or use the up and down cursor keys.
Menu: Classic user interface: Viewpoint ➤ Navigation Mode ➤ Turntable
Command entry: CTRL + 0
View All Tool
Makes the complete model fit into the Scene View.
92 | Chapter 6 Explore Your Model