2012

Look At
The tool is activated by clicking Look At in the Look drop-down on the
navigation bar. It behaves the same way as the SteeringWheels Look tool
when you press and hold the SHIFT key.
Focus
The tool is activated by clicking Focus in the Look drop-down on the
navigation bar. See Focus (page 175) for more details.
Walk and Fly Tools
Set of navigation tools for moving around the model and controlling realism
settings. These tools are not available in a 2D workspace.
The following tools are available:
■ Walk . Moves through a model as if you were walking through it.
■ Fly
. Moves through a model like in a flight simulator.
Walk
The tool is activated by clicking Walk in the Walk/Fly drop-down on the
navigation bar. By default, the tool behaves like the Walk tool on the
SteeringWheels. You can customize the tool options in the Options Editor.
You can also switch back to the classic Walk mode.
Fly
The tool is activated by clicking Fly in the Walk/Fly drop-down on the
navigation bar. It behaves the same way as the classic Fly mode.
See also:
Control the Realism of Your Navigation (page 176)
To use classic Walk tool with the navigation bar
1 On the navigation bar, click Customize ➤ Navigation Bar Options.
2 In the Options Editor, the Navigation Bar page under the Interface
node, select the Use Classic Walk check box in the Walk Tool area.
112 | Chapter 5 Explore Your Model