2012

Menu: Classic user interface: Review ➤ Measure ➤ Point to Point
To keep the same start point as you measure a distance between two points
1 Click Review tab ➤ Measure panel ➤ Measure drop-down ➤ Point
to Multiple Points
.
2 Click the start point, and the first end point to be measured. A measuring
line is displayed between two points.
3 Click to register the next end point to be measured.
4 Repeat this to measure additional end points if required. The optional
dimension label always displays the last measured distance. Your start
point stays the same throughout.
TIP If you want to change the start point, right-click in the Scene View,
and select a new start point.
Menu: Classic user interface: Review ➤ Measure ➤ Point to Multiple
Points
To measure a total distance along a route
1 Click Review tab ➤ Measure panel ➤ Measure drop-down ➤ Point
Line
.
2 Click the start and the second point to be measured.
3 Click the next point along the route.
4 Repeat this to measure the entire route. The optional dimension label
displays the total distance along the selected route.
Measure Tools | 223