Autodesk Navisworks Review 2010 User Guide March 2009
© 2009 Autodesk, Inc. All Rights Reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December, 3December.
Contents Welcome to Autodesk Navisworks Review 2010 . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1 What Is New in This Release? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 2 How to Get Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Use Communication Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Overview of Communication Center . . . . . . . . . . . . . . .
Install Autodesk Navisworks for Multiple Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start to Network Administration and Deployment . . . . . . . . . . . . . . . . . . . . . . Deployment Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Set Up Network Tools and Your License Server . . . . . . . . . . . . . . . . . . . . . . . . Distribute the Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Search Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Get a Whole-Project View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Chapter 5 Work with Files . . . . . . . . . . . . . . .
Control the Realism of Your Navigation . Gravity . . . . . . . . . . . . . . . Crouching . . . . . . . . . . . . . . Collision . . . . . . . . . . . . . . . Third Person View . . . . . . . . . . Head-Up Display . . . . . . . . . . . . . Chapter 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Organize Viewpoints . . . . . . . Edit Viewpoints . . . . . . . . . . Default Viewpoint Options . . . . Share Viewpoints . . . . . . . . . Sectioning . . . . . . . . . . . . . . . . Enable Section Planes . . . . . . . Position and Use Section Planes . Link Section Planes . . . . . . . . Enable and Use Section Boxes . . Chapter 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locations Page . . . . . . . . Environment Page . . . . . . Communication Center Page . Auto-Save Page . . . . . . . . Model Node . . . . . . . . . . . . . Performance Page . . . . . . . NWD Page . . . . . . . . . . . NWC Page . . . . . . . . . . . Interface Node . . . . . . . . . . . . Display Units Page . . . . . . Selection Page . . . . . . . . . Measure Page . . . . . . . . . Snapping Page . . . . . . . . . Viewpoint Defaults Page . . . Hyperlinks Page . . . . . . . . Smart Tags Page . . . . . . . .
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x | Contents
Welcome to Autodesk Navisworks Review 2010 Autodesk Navisworks Review 2010 software extends access to existing design data for real-time visualization to experience design projects before they are real. Project quality improves by combining and sharing of 3D design data and information, regardless of file size or format. Easy-to-use design review tools improve insight and understanding of design intent.
2 | Part 1 Welcome to Autodesk Navisworks Review 2010
What Is New in This Release? 1 Autodesk Navisworks Review 2010 contains many new features and enhancements. Installation The installation screen provides links to the installation options, deployment options, installation tools and utilities, documentation and language settings. When installing the product you can select to install either the 32-bit or 64-bit version. You also have the option of selecting the DWG file readers that require installation, plus the exporter plugins that you require.
■ Button menus. In Autodesk Navisworks, some toolbar buttons exist in mutually-exclusive groups of which only one at a time can be selected. These buttons are now grouped under drop-down menus to improve accessibility and decrease screen clutter. ■ Artificial horizon. You can now place your model against a fixed artificial horizon so that it appears more realistic and does not float in mid air. The background of the 3D scene is split across the horizontal plane giving the effect of a sky and the ground.
■ Align section planes to specific faces of an object or line. See “Sectioning” on page 244. Auto-Save You now have the option of automatically saving your work at regular intervals. See “Automatically Save and Recover Files” on page 53. Communication Center The Communication Center and announcements. allows the Autodesk Navisworks and Autodesk team to notify you of product-related updates See “Use Communication Center” on page 7.
6 | Chapter 1 What Is New in This Release?
How to Get Assistance There are various ways to find information about how to use this program, and multiple resources are available. 2 Use Communication Center Communication Center provides up-to-date product information, software updates, product support announcements, and other product-related announcements. Overview of Communication Center Communication Center provides up-to-date product information, software updates, product support announcements, and other product-related announcements.
Communication Center provides the following kinds of announcements: ■ Product Support Information. Get breaking news from the Product Support team at Autodesk, including when Live Update maintenance patches are released. ■ Subscription Announcements. Receive subscription announcements and subscription program news, as well as links to e-Learning Lessons, if you are an Autodesk subscription member (available in countries/regions where Autodesk subscriptions are offered).
6 Click OK. To specify the channels to display in the Communication Center panel 1 Open the Communication Center panel, and click Options. 2 In the Options Editor, expand the General node, expand the Communication Center node, and click the Autodesk Channels option. 3 On the Autodesk Channels page, select the Subscribed check boxes for all channels you want to display. 4 Click OK. To specify balloon notification settings 1 Open the Communication Center panel, and click Options.
■ Allows you to perform a search for a phrase when the phrase is enclosed in double quotes. ■ Displays a ranked list of topics that contain the word or words entered in the keyword field. ■ Arranges the results alphabetically by title or by location if you click on the Title and Location column headings. Use Searches Use the Search tab to find relevant topics based on keywords that you enter.
specified, AND is used. For example, the query spacing border printing is equivalent to spacing AND border AND printing.
NOTE When you select the second option, you may get numerous printed pages, depending on how many subtopics the currently selected topic contains. To print a Help topic 1 Display the topic you want to print. 2 Right-click in the topic pane. Click Print. 3 In the Print dialog box, click Print. To print a selected heading and all subtopics 1 Display the topic you want to print and make sure that the Contents tab is displayed. 2 On the Help toolbar, click Print.
Autodesk Authorized Training Centers The Autodesk® Authorized Training Center (ATC®) network delivers Autodesk-authorized, instructor-led training to design professionals who use Autodesk software. Autodesk Authorized Training Centers use experienced and knowledgeable instructors. More than 1,200 ATC sites are available worldwide to meet your needs for discipline-specific, locally based training. To find a training center near you, contact your local Autodesk office or visit http://www.autodesk.com/atc.
About Subscription Center With Autodesk Subscription, you get the latest releases of Autodesk software, incremental product enhancements, personalized web support from Autodesk technical experts, and self paced e-Learning. Subscription services are available to subscription members only. By clicking the Communication Center options (under Subscription Center): button on the Standard toolbar, members have access to the following ■ Subscription status. Checks your subscription status.
View the Product Readme You can find late-breaking information about this software in the Readme. It is suggested that you read through the Autodesk Navisworks Readme for information about recommended hardware, updated installation instructions, and known software problems. Join the Customer Involvement Program You are invited to participate in helping guide the direction of Autodesk design software.
To turn the CIP on or off 1 Click Help ➤ Customer Involvement Program. 2 In the Customer Involvement Program dialog box, click a level of participation, and then click OK.
Installation This chapter provides information about installing and activating Autodesk Navisworks on a workstation, as well as deploying Autodesk Navisworks from a network location. 3 Quick Start to Stand-Alone Installation This section provides step-by-step instructions about how to prepare, and then install Autodesk Navisworks. If you have never installed the product before, you should familiarize yourself with the entire installation process and options before beginning.
See the following table for hardware and software requirements.
Hardware and software requirements Optional hardware Open GL©-compatible 3D video card; Printer or plotter; Modem or access to an Internet connection; Network interface card Understand Administrative Permission Requirements To install Autodesk Navisworks, you must have administrator permissions. You do not need to have domain administrative permissions. See your system administrator for information about administrative permissions. To run Autodesk Navisworks, you do not need administrator permissions.
NOTE Some products may not have multi-language support at the time of product release. Additional language support may be available later. Check http://autodesk.com/servicesandsupport for the availability of additional language packs. Using Language Packs Language packs (.msi) support use of different languages in each Autodesk Navisworks product, including exporters. Pack names start with NAVFREE_, NAVREV_, NAVSIM_, NAVMAN_, and exporters_ respectively.
The Installation wizard for packages that are comprised of multiple products gives you the option to choose which products you want to install. In the Installation wizard, for packages containing multiple products, you can choose which products and languages you want to install. During the install process, you are informed whether a copy of the software is already installed. You are also warned if your system does not meet the minimum system requirements for the product.
Only default values are used which means it is a typical installation being installed to C:\Program Files\Autodesk\Navisworks Review 2010. To install Autodesk Navisworks using default values on a stand-alone computer 1 Insert the Autodesk Navisworks Review 2010 DVD into your computer's DVD drive. The Autodesk Navisworks Review 2010 Installation wizard launches in the language that best matches the settings on your computer. If the Installation wizard does not start automatically, double-click Setup.
The wizard does the following: ■ ■ Uses a Typical installation, which installs the most common application features. To see which features are included in a Typical installation, refer to “Typically Installed Features” on page 46. Installs Autodesk Navisworks to the default install path of C:\Program Files\Autodesk\Navisworks Review 2010. ■ Installs the products you selected in Step 3.
5 On the Products and User Information page, enter your serial number, product key, and user information. Review the Privacy Policy from the link at the bottom of the dialog box. After reviewing, click Next. IMPORTANT The information you enter here is permanent and is displayed in the Autodesk Navisworks Review 2010 window (accessed by Help ➤ About) on your computer. Because you can't change this information later without uninstalling the product, make sure you enter the correct information now.
9 To configure Navisworks exporter plugins, click the product tab. The Select the Installation Type page, shows a list of all exporter plugins: ■ ■ - indicates plugins with the 3rd party software already installed on your PC. - indicates plugins for the 3rd party software, which is either not installed on your PC or has not been detected by the Installation wizard. Select the check boxes next to all required plugins.
2 On the Shortcut tab, enter a space in the Target field after ..\roamer.
Reinstall or Repair Autodesk Navisworks Review 2010 If you accidentally delete or alter files that are required by Autodesk Navisworks Review 2010, Autodesk Navisworks might not perform correctly, and you might receive error messages when you try to execute a command or find a file. You can attempt to fix this problem by reinstalling or repairing Autodesk Navisworks Review 2010.
If you've purchased an upgrade version of Autodesk Navisworks Review 2010, you are required to uninstall the previous version within 120 days of installing Autodesk Navisworks Review 2010. See your license agreement for more information. Install Autodesk Navisworks for Multiple Users This section provides step-by-step instructions for installing network-licensed or multi-seat stand-alone versions of the Autodesk Navisworks Review 2010.
Hardware and software requirements for the network license server Network interface card Compatible with existing Ethernet network infrastructure Communication protocol TCP/IP Hardware and software requirements for client machine Hardware/Software Requirement Operating system 32-Bit Windows©XP© Professional, SP 2 or SP 3; Windows XP Home, and Professional, SP 2 or SP 3; Windows Vista Ultimate, SP 1; Windows Vista Enterprise, SP 1; Windows Vista Business SP 1; Windows Vista Home Premium, SP 1; Windows
Hardware and software requirements for client machine 256 MB or greater - 1280 x 1024 32-bit color video display adapter, True Color (recommended) Hard disk Installation 800 MB Pointing device MS-Mouse compliant DVD-ROM Any speed (for installation only) Optional hardware Open Open GL®-compatible 3D video card Printer or plotter Modem or access to an Internet connection Network interface card Choose an Installation Type When you set up your deployment, you need to choose the type of installation to d
For the network installation, use one of the following license server models: ■ Single license server model. The Network License Manager is installed on a single server, so license management and activity is restricted to this server. A single license file represents the total number of licenses available on the server. ■ Distributed license server model. Licenses are distributed across more than one server. A unique license file is required for each server.
To Activate a Network License Through Autodesk.com If your product does not include the Network License Activation Utility, you can activate your license by going to https://registeronce.autodesk.com, and following the on-screen instructions. Configure Your License Server You configure a license server so that you can manage the Autodesk Navisworks product licenses. You can configure the license server with the lmtools.exe utility.
Distribute the Program Once you have fully prepared for creating a deployment, you are ready to set up and distribute Autodesk Navisworks by using the Deployment wizard and choosing a deployment method. Create a Network Share A network share is an installation folder that you make available to users' computers on a network. You point users to this location to install the program.
NOTE Users must have Read permissions to access the network share and administrative permissions on the workstation where this program is installed. ■ Scripting. A script executes a command or a set of commands. Scripts are similar to batch files but are more flexible. Installation scripts are most useful for stand-alone installation of programs on computers that are connected to a network. Scripts are also useful for installing service packs, extensions, and object enablers on a network.
Deployment Checklist You know how you’re going to personalize the programs during registration. Using consistent registration data is very important. You have identified the location (such as a shared folder) where deployments will reside for each program you plan to deploy. You have closed all other programs and disabled antivirus software. You have decided what languages you will include in your administrative image, and what languages you will use for your deployment package.
NOTE To get a copy of your settings, select the Copy to Clipboard button. If you do not wish to make configuration changes on the Review - Configure - Create Deployments page, click Create Deployment. Your Deployment Choices When you create a deployment, you will make several choices during the process to create various client deployment images and deployment types. The following sections outline your choices in more detail.
file. The log lists the user name, workstation name, and the status of the installation. Refer to this file for status information and details about problems that users encountered during installation (for example, low disc space or inadequate permissions). The network log is named with the same name you chose for your deployment. You can specify where the log file is created by entering either a valid UNC (universal naming convention) path or hard-coded path on your network, for example \\MyComputer\Autode
Select a License Type (optional) When you set up your deployment, you choose the type of installation to deploy based on the type of software license you purchased: stand-alone or network. You also select the network license server model you want to use to distribute product licenses. IMPORTANT Depending on the type of option you choose on the configuration page, network or stand-alone license, note that you must use the same type of installation for all those products in your deployment session.
If you have already used the Network License Manager to create a license server model, you must select the same license server model in this step. If you have not yet used the Network License Manager to create a license server model, make sure that you select the same settings in the Network License Manager that you choose here. 3 Enter the name of one of the servers that will run the Network License Manager, or click the Browse button to locate the server. Click Add to add the server to the Server Pool.
Your choices are as follows: ActiveX Lite Control Contains Navisworks ActiveX Lite control. API Contains the Component Object Model interface for customizing and extending the Navisworks functionality. Example NWD files Contains various feature sample files. PDF Manual Contains the Autodesk Navisworks User Guide in PDF format. Autodesk Navisworks Review 2010 Contains full set of Navisworks files. Sample RPCs Contains several Rich Photorealistic Content files.
NOTE Some products may not have multi-language support at the time of product release. Additional language support may be available later. Check http://autodesk.com/servicesandsupport for the availability of additional language packs. Using Language Packs Language packs (.msi) support use of different languages in each Autodesk Navisworks product, including exporters. Pack names start with NAVFREE_, NAVREV_, NAVSIM_, NAVMAN_, and exporters_ respectively.
3 On the Select the Products to Include in the Deployment page, select the products you want to include, the languages to include in your administrative image, and the language of your deployment: a For a 64-bit version of Windows, you can install both 32-bit and 64-bit versions of Autodesk Navisworks, 64-bit version of Autodesk Navisworks Freedom, and both 32-bit and 64-bit versions of exporter plugins.
2 On the Begin Deployment page, specify the following: administrative image location, deployment name, and if your target system is 32 or 64-bit. ■ In the Administrative Image field, enter the path to your existing shared network location, or use the Browse button to navigate to that location. This area is where you create and store your administrative image. Users install the program from this location. NOTE If you do not know how to create a network share, see “Create a Network Share” on page 33.
7 On the Review - Configure - Create Deployments page, click the Configure button to make changes to the administrative image. Each of the products you selected to install, has its own configuration tab: ■ For Autodesk Navisworks Freedom 2010 you can change the installation path. ■ For Autodesk Navisworks Manage 2010, you can change the license type, installation type, installation path, and the project and site folder paths.
You need to notify your users of the shortcut that was created in the administrative image. The shortcut is the same name that you chose when you created a deployment. To point users to the administrative image ■ The simplest method of notifying users how to install the deployment is to email them with instructions about using the shortcut. At a minimum, the instructions need to include the location of the deployment and instructions about double-clicking the shortcut to the deployment.
3 Review the information about your system including the graphics card driver and driver version, and click OK to close the dialog.
3 Place the exported settings inside the appropriate subfolders. The centralized workspace files should go into the Workspaces subfolder, the centralized global options files should go into the global_options subfolder, and so on. Where are my product manuals? All documentation created for Autodesk products are built in two different formats: PDF and CHM. ■ ■ CHM files are made available during installation; click the Documentation link in the Installation wizard.
Deployment Issues This section outlines common issues and their solutions with regards to software deployments. Is there a checklist I can refer to when performing a deployment? The Installation chapter contains a complete section that describes preliminary actions and the entire deployment process. See “Preliminary Tasks for a Network Deployment” on page 34. Where should deployments be located? Shared folders are required for both network license and multi-seat stand-alone methods of installation.
■ Subscription Center announcements and subscription program news, as well as links to e-Learning Lessons, if you are an Autodesk subscription member. ■ Notifications of new articles and tips posted on Autodesk websites. Licensing Issues This section outlines common issues and their solutions with regards to software licenses and licensing your products.
If I choose to create a log file, what kind of information does the log file contain? There are two types of log files that can be generated that monitor information about deployments and installations. ■ The Network log file keeps a record of all workstations that run the deployment. The log lists the user name, workstation name, and the status of the installation. Refer to this file for status information and details about problems that users may have encountered during installation.
Do I need my original disk to reinstall my software? When performing a reinstall of the product, you do not need to have the original DVD on hand. Installation data is cached locally on your drive and that data is reused when reinstalling. When I uninstall my software, what files are left on my system? If you uninstall the product, some files remain on your system such as files you created or edited. Your license file also stays on your workstation when you uninstall your product.
52 | Chapter 3 Installation
Quick Start This chapter helps you get up-to-speed with the Autodesk Navisworks interface. 4 Start and Quit Autodesk Navisworks Once you've installed Autodesk Navisworks Review 2010, you can start it from the Windows desktop or from the command line. To start Autodesk Navisworks, do one of the following from the Windows desktop: ■ Double-click the Autodesk Navisworks icon, or ■ Go to Start ➤ All Programs (or Programs) ➤ Autodesk ➤ Navisworks Review 2010 ➤ Autodesk Navisworks Review 2010.
Enviro-Dome.Autosave0.nwf, the second auto-saved file is called Enviro-Dome.Autosave1.nwf and so on. You can control a number of auto-save options, such as how often Navisworks saves your work, the location of backup files, and the maximum number of backup files you want to keep. To customize the auto-save options 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the General node, and click Auto-Save. 3 Adjust the auto-save options, as required.
6 In the Save As dialog box, enter a new file name, and browse to the desired location. 7 Click Save. Command Line Options Command line switches can specify different startup routines for Navisworks. You can use command line switches to specify several options when you start the program. For example, you can run Autodesk Navisworks in another language, perform additional memory checks, load and append files, output error reports.
Command Line Switch Argument Description -nwc [outputfile.nwc] [inputfile] Autodesk Navisworks converts an input file into the NWC format in the background, and places it into the specified directory. You must provide the full file paths within quotation marks. For example, “C:\temp\a.dwg" -nwd [outputfile.nwd] [input file] Autodesk Navisworks converts an input file into the NWD format in the background, and places it into the specified directory.
The User Interface The Autodesk Navisworks interface contains a number of traditional Windows elements, such as toolbars, dockable windows, dialog boxes and shortcut menus in which you complete tasks. Parts of Autodesk Navisworks Interface This section briefly describes the main interface components. The Autodesk Navisworks interface is intuitive and easy to learn and use. You can adjust the application interface to match the way you work.
Option Description Refresh Refreshes your scene with the latest versions of currently loaded model files. Open Displays the Open dialog box. Open URL Displays the Open URL dialog box. Append Displays the Append dialog box. Merge Displays the Merge dialog box. Save Saves the currently open Navisworks file. Save As Displays the Save As dialog box. Publish Displays the Publish dialog box. Print Displays the Print dialog box. Print Preview Enables print preview mode.
Option Description Find Items Toggles the Find Items control bar. Find Comments Toggles the Find Comments dialog box. Hidden Toggles hidden mode for selected items. Required Toggles required mode for selected items. Unselected Hidden Toggles hidden mode for unselected items. Override Item Enables you to override color, transparency, and transform for selected items. Reset Item Enables you to reset selected items back to their original state.
Option Description Look From Enables you to look from a preset viewpoint. Set Viewpoint Up Sets the viewpoint up vector to align with the selected orientation. Rendering Enables you to select rendering mode. Lighting Enables you to select lighting mode. Display Enables you to display primitives. Navigation Mode Enables you to select navigation mode. Navigation Tools Enables you to control the camera during interactive navigation.
Option Description DataTools Displays the DataTools dialog box. Compare Displays the Compare dialog box. Redline Toggles the Redline Tools tool window. Hyperlinks Toggles the display of hyperlinks. Smart Tags Toggles the display of smart tags. Measure Toggles the Measure Tools tool window. Animation Enables you to control animation playback, and record viewpoint animations. Background Enables you to select a background color for the Scene Area.
You can rearrange, open and close toolbars: ■ To move a toolbar, click the dotted line at the edge of the toolbar, and drag it to a different location. ■ To open or close toolbars, right-click an empty area next to the last toolbar on the screen, and choose from the list of available toolbars on the shortcut menu. In addition to rearranging the existing Autodesk Navisworks toolbars, you can customize their appearance and content, and create your own toolbars.
Button Description Displays the Open URL dialog box. Displays the Merge dialog box. Saves the currently open Navisworks file. Displays the Publish dialog box. Saves the currently open Navisworks file, accesses your email program, and adds the saved file as an email attachment. Reverses the last performed operation. Reverses the last operation performed by the Undo command. Displays the Print dialog box. Displays copyright and license information about your copy of Autodesk Navisworks.
Button Description Turns on walk mode. Turns on look around mode. Turns on zoom mode. Turns on zoom box mode. Turns on pan mode. Turns on orbit mode. Turns on examine mode. Turns on fly mode. Turns on turntable mode. Rendering Style Toolbar This toolbar controls the model appearance in Navisworks. Button Description Selects lighting mode. Selects rendering mode. Toggles the rendering of surfaces. Toggles the rendering of lines. Toggles the rendering of points.
Button Description Toggles the display of smart tags. Toggles the Measure Tools tool window. Toggles the Viewpoints control bar. Toggles the Sectioning toolbar. Toggles the Plan Thumbnail control bar. Toggles the Section Thumbnail control bar. Toggles the Selection Tree control bar. Toggles the Selection Sets control bar. Toggles the Comments control bar. Toggles the Find Comments dialog box. Toggles the Find Items control bar. Toggles the Properties control bar.
Button Description Displays the Set Sectioning Box Size dialog box. Restricts the section distance to the bounding box limits of the objects selected in the Scene Area Displays the Sectioning Plane dialog box. Enables/disables the current section plane or box. Deletes the current section plane. Enables you to choose the alignment method. Animation Toolbar This toolbar allows you to record viewpoint animations, play back object and viewpoint animations, and toggle the scripting functionality.
This toolbar enables you to participate in design review sessions across a Local Area Network (LAN). Button Description Starts Windows™ NetMeeting. Enables you to rtake control of the session, and become the ‘driver’. Refreshes Navisworks data on all attendees machines. Object Manipulation Toolbar This toolbar enables you to edit geometry in your model. Button Description Toggles the display of the translation gizmo. Toggles the display of the rotation gizmo. Toggles the display of the scale gizmo.
Button Description Toggles gravity. Toggles crouching. Toggles third person view. Aligns the current viewpoint with the X axis. Aligns the current viewpoint with the Y axis. Aligns the current viewpoint with the Z axis. Straightens the camera. Scene Area This is the area where you view and interact with your 3D models. When you start Navisworks, the Scene Area contains only one scene view, but you can add more scene views, if needed.
You can make custom scene views dockable. Dockable scene views have title bars, and can be moved, docked, tiled, and auto hidden the same way as dockable windows. If you want to use several custom scene views, but don't want to have any splits in the Scene Area, you can move them elsewhere. For instance, you can tile your scene views on the Viewpoints control bar. NOTE You cannot undock the default scene view.
■ Use View - makes the content fill the currently active scene view. ■ Explicit - defines the exact width and height for the content. ■ Use Aspect Ratio - uses the aspect ratio of the current scene view to automatically calculate the width of the content when the height is entered, or the height of the content when the width is entered. 3 If you selected the Explicit option, enter the width and height for your content in pixels.
When the window you are dragging is close to the place where you want it to dock, move the mouse over the corresponding area of the docking tool. You will see an outline of the window appear on the interface. To dock the window there, release the mouse button. Tile Windows You can tile dockable windows on the interface. To do this, drag a window you want to tile over the window where you want it to be placed. When a rectangular outline appears, release the mouse button.
Memory Bar The field to the right of the icons reports the amount of memory currently being used by Autodesk Navisworks. This is reported in Megabytes (MB). Undo/Redo Commands You can undo or redo your actions in Autodesk Navisworks. The default settings are adequate for regular Autodesk Navisworks usage, but you can adjust the amount of space allocated to the undo/redo buffer, if necessary. The Edit ➤ Undo and Edit ➤ Redo menu items state what type of action you can undo/redo.
2 On the View menu, click Workspaces ➤ Save Workspace. 3 In the Save Current Workspace dialog box, enter a name for the new workspace. You can also select the name of an existing workspace to overwrite it with your modified configuration. 4 Click Save. To load a saved workspace into Navisworks 1 On the View menu, click Workspaces ➤ Load Workspace. 2 In the Load Workspace dialog box, browse to the folder containing the desired workspace, and select it. 3 Click Open.
Many keyboard shortcuts are already set for most commonly used actions. You can modify the default shortcuts or add new shortcuts, if necessary. Quick Reference Default Keyboard Shortcut Description ALT + F4 Closes the currently active dockable window when it is undocked, or exits the application if the main application window is active. ALT + F6 Switches between the dockable windows when they are undocked. CTRL + 0 Turns on turntable mode. CTRL + 1 Turns on select mode.
Default Keyboard Shortcut Description CTRL + T Toggles third person mode. CTRL + Y Reverses the last operation performed by the Undo command. CTRL + Z Reverses the last performed operation. CTRL + F1 Opens the Help system. CTRL + F7 Toggles the Camera Tilt control bar. CTRL + F8 Toggles the Sectioning toolbar. CTRL + F9 Toggles the Plan Thumbnail control bar. CTRL + F10 Toggles the Section Thumbnail control bar. CTRL + F11 Toggles the Viewpoints control bar.
Default Keyboard Shortcut Description SHIFT + F6 Toggles the Comments control bar. SHIFT + F7 Toggles the Properties control bar. SHIFT + F10 Opens a shortcut menu for the active dockable window. Customize the Toolbars You can customize the appearance and contents of the Autodesk Navisworks toolbars by using the Customize dialog box. To add a custom toolbar 1 Click Tools ➤ Customize. 2 In the Customize dialog box, Toolbars tab, click the New button.
NOTE You can only delete custom toolbars. 4 Close the Customize dialog box. To add commands 1 Click Tools ➤ Customize. This opens the Customize dialog box. 2 There are several ways to add commands to a toolbar or a menu: ■ In the Customize dialog box, Commands tab, click the desired category, and drag the command from the commands list on to the toolbar. If the command has a default icon assigned to it (it is shown next to the command in the command list), the icon will appear as a button on your toolbar.
3 In the Customize Keyboard dialog box, use the Categories and Commands lists to find desired command. 4 Click the command, and choose a shortcut in the Select a New Shortcut drop-down list. 5 Click Assign. NOTE Clicking Remove removes the shortcut assignment for the selected command, and clicking Reset All restores the default shortcut assignments. 6 Close the dialog boxes. Autodesk Navisworks Options There are two types of options: File Options and Global Options.
Global Options Global options, on the other hand, are set for all Autodesk Navisworks sessions. The Options Editor can be accessed from the Tools menu, or it can be launched as a separate application. To do this, click Start ➤ Programs ➤ Autodesk ➤ Navisworks Review 2010 ➤ Options Editor. The options are grouped together, and presented in a tree structure, making it quicker to find and change them.
TIP To quickly select/deselect all options for a given category, use the top-level check boxes. For example, selecting the General check box, instantly selects all options under this node. 4 Click OK to export the selected settings. 5 In the Save As dialog box, enter a name for the settings file. You can also select the name of an existing settings file to overwrite it with your modified configuration. 6 Click Save. 7 Click OK to close the Options Editor.
4 Click OK to close the Options Editor. Environment Options You can adjust the number of recent file shortcuts stored by Autodesk Navisworks. To configure environment options 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the General node, and click the Environment option. 3 On the Environment page, enter the desired number into the Maximum Recently Used Files box. By default, shortcuts to the four most recently opened files can be displayed. 4 Click OK.
To configure location options 1 Click Tools ➤ Global Options. 2 Expand the General node in the Options Editor, and click the Locations option. 3 In the Project Directory box, browse to the directory that contains the Autodesk Navisworks settings specific to your project group. 4 In the Site Directory box, browse to the directory that contains the Autodesk Navisworks settings standard across the entire project site. 5 Click OK.
3 Select the Linear Units from the drop-down list. Be sure to choose the exact format required. 4 Select the Angular Units from the drop-down list. 5 Enter the number of decimal places you want to see throughout the interface for your units in the Decimal Places box. If the unit chosen is a fractional unit, rather than a decimal unit, then you have the choice of what level of fraction to display the units from the Fractional Display Precision drop-down list. 6 Click OK.
4 Click OK. Search Directories Autodesk Navisworks searches for a variety of configuration files in subdirectories of three standard directories. These files can be overridden on a per user, all users or per installation basis. The search directories are: ■ Application Data\Autodesk Navisworks Review 2010 within the current user profile. For example, C:\Documents and Settings\user\Application Data\Autodesk Navisworks Review 2010 where user is the name of the current user. ■ Application Data\Autodesk Nav
Get a Whole-Project View 85
86 | Part 2 Get a Whole-Project View
Work with Files In Autodesk Navisworks you can open files originated from a variety of CAD applications. 5 You can combine these files together, and create a single Autodesk Navisworks file with a whole-project view of your model. This file brings together geometry and data created by multi-disciplinary teams, and enables you to explore and review complex models in real-time. Native File Formats Autodesk Navisworks has three native file formats: NWD, NWF, and NWC.
■ “NWD File Options” on page 281 Compatible CAD Applications The table below is provided as a quick reference only, and does not contain an exhaustive list of compatible CAD applications. For additional information, please refer to the Features and Specifications section on our website http://www.autodesk.com/navisworks.
Application File Formats CADopia IntelliCAD DWG, DXF CEA Technology Plant-4D DWG, DGN COADE CADWorx Plant DWG, DXF, 3DS COADE CADWorx Pipe DWG, DXF, 3DS COADE CADWorx Steel DWG, DXF, 3DS COINS BSLink DWG, DXF, 3DS COINS Framing DWG, DXF, 3DS CSC 3D+ DWG Dassault Systemes CATIA DXF, IGES, STEP Google SketchUp SKP, DWG, 3DS Hannappel Software GmbH elcoCAD R4 DWG, DXF, 3DS Integraph PDS DRI, DRV, DWG, DXF, DGN, IGES, STEP Informatix MicroGDS MAN ITandFactory CADISON DWG, DXF, 3DS
Application File Formats Tekla Structures DGN, VRML, CIS/2 Tekla Xsteel DGN think3 thinkdesign DWG, DXF, IGES, STEP UGS I-deas DXF, IGES, STEP UGS Solid Edge IGES, STEP UGS NX (Unigraphics) DXF, IGES, STEP UGS Factory CAD DWG, DXF, 3DS UHP Process Piping FabPro Pipe DWG, DXF, 3DS UHP Process Piping x-plant DWG, DXF, 3DS Supported CAD File Formats See the following table for the native CAD file formats you can open in Autodesk Navisworks without having the CAD applications installed on yo
Format Extension 3D Studio .3ds, .prjv IMPORTANT The DWG/DXF/SAT file formats are supported when you run the 64-bit version of Autodesk Navisworks on a 64-bit version of Windows, or when you run the 32-bit version of Autodesk Navisworks on a 32-bit version of Windows. They are not supported when you run the 32-bit Autodesk Navisworks on a 64-bit version of Windows. Supported Laser Scan File Formats See the following table for the laser scan file formats you can open in Autodesk Navisworks.
Unsupported Entities ■ Keyframes (objects are currently taken from keyframe 0) ■ Texture maps in the formats: gray-scale .tga, .tif, .gif, .png. ■ Other maps (e.g. opacity maps, reflections etc.) ■ Wireframe meshes ■ Lines, splines ■ Points ■ Background images See also: ■ “3DS File Reader Options” on page 291 ASCII Laser Scan File Reader Most scanner software support exporting the point data in an ASCII text file.
CIS2 File Reader The CIS2 file reader supports CIMSteel Integration Standards (CIS/2) adopted by the American Institute of Steel Construction (AISC) as their format for data exchange between steel related CAD software.
■ Fastener_simple_bolt ■ Fastener_simple_shear_connector Unsupported Entities ■ Part_complex ■ Part_prismatic_complex ■ Part_sheet_profiled ■ Section_profile_centreline ■ feature_cutting_plane ■ feature_edge_chamfer ■ feature_surface ■ feature_thread ■ feature_volume_complex ■ feature_volume_curved ■ feature_volume_hole ■ Element_volume ■ Element_surface ■ Element_point ■ Element_curve_complex ■ Element_with_material ■ Joint_system_amorphous ■ Joint_system_chemical ■
■ Tee ■ Angle ■ Channel ■ Circle ■ Rectangle ■ Double Angle ■ Joist Supported AISC Section Profile Types The reader supports all AISC defined section profile types and maps them to the basic section profile types: ■ I-Beam: HP, M, S, W ■ Tee: MT, ST, WT ■ Angle: L, LP ■ Channel: C, MC ■ Circle: HSRO, P, PX, PXX, RB ■ Rectangle: HSRE, HSSQ, SB, TS ■ Double Angle: DL, DLL, DLS See also: ■ “CIS2 File Reader Options” on page 291 DWG/DXF/SAT File Reader The DWG/DXF/SAT file reader u
■ Groups ■ External references (xrefs) ■ Hyperlinks ■ Text or multi-line text ■ Entity handles ■ Attributes ■ Textures ■ File properties Unsupported Entities ■ Lights ■ Splines ■ Multi-lines ■ Linetypes ■ Dimensions and leaders ■ Raster bitmaps ■ Construction lines (xlines and rays) ■ Hatching See also: ■ “DWG/DXF/SAT File Reader Options” on page 293 Overview of Object Enablers Object Enablers (OEs) can be thought of as a ‘translator’ for custom objects.
To install and use an OE with Navisworks 1 Obtain the required OE, and run the installer. 2 On the OE Setup page, select the check box for the relevant Autodesk Navisworks products. NOTE Some OEs have dependencies on other OEs, and, therefore, must be installed in a specific order. For example, the AutoCAD MEP 2009 OE has a dependency on the AutoCAD Architecture 2009 OE. As a result, the AutoCAD MEP 2009 OE must be installed after the AutoCAD Architecture OE. 3 Click Install.
Unsupported Entities ■ 2D lines/plot sections ■ Thumbnails ■ Marked-up sketches ■ More than one 3D section per file (any others are ignored) ■ NURBS surfaces ■ Cameras See also: ■ “DWF File Reader Options” on page 293 DGN File Reader Autodesk Navisworks can read 3D DGN and PRP files from Bentley's MicroStation, but does not support CEL files or 2D DGNfiles. Referenced files and instances of cells are respected, and the Selection Tree reflects this file structure.
Faro Scan File Reader The file reader supports files from all Faro™ scanners. Combined iQscan files must be located in a folder called ‘Scans’ in the same directory as the associated iQmod and iQwsp workspace files. See also: ■ “Faro Scan File Reader Options” on page 295 IFC File Reader The file reader supports stand-alone IF files.
■ Colors ■ Planes ■ Parametric spline, ruled, B-spline, offset, bounded, trimmed and plane surfaces and surfaces of revolution.
■ Geometric transform attribute ■ Material attribute ■ XT B-Rep segment ■ Properties Unsupported Entities ■ Point set shape ■ Polygon set shape ■ Wire harness set shape ■ Pyramid primitive shape ■ Tri-prism primitive shape ■ PMI manager meta data ■ Models with facet-based or primitive-based color and normal ■ Texture ■ HSV color model ■ B-Rep CAD tag ■ Line style attribute ■ Point style attribute ■ Shader effects attribute ■ Vertex shader attribute ■ Fragment shader attr
MAN File Reader The file reader supports MAN files from Informatix's MicroGDS™ version 6.0 or later. MicroGDS™ projects are not supported. The workaround is to export the desired project window with a .man extension. In Autodesk Navisworks, MicroGDS renderer materials are shown in their flat-shaded colors in shaded mode. In full render mode, or with Presenter rendering, the full shaders are used. Only the standard LightWorks shaders are available.
PDS File Reader The file reader supports DRI files from the PDS Design Review package. See also: ■ “PDS File Reader Options” on page 298 Riegl Scan File Reader The file reader supports files from all Riegl™ LMS scanners.
■ Object Animation ■ Smooth Animation ■ Groups ■ Autotags See also: ■ “RVM File Reader Options” on page 299 SketchUp SKP File Reader The file reader supports native SKP file format.
Unsupported Entities ■ Points ■ PCurves, B-spline, rational B-spline, Bezier, trimmed, uniform or quasi-uniform curves. ■ Circles or ellipses ■ Hyperbola See also: ■ “STEP File Reader Options” on page 300 STL File Reader The file reader only supports binary STL files. ASCII versions are not supported.
■ VRML2 Fog nodes ■ VRML2 AudioClip and Sound nodes ■ All text-related nodes (VRML1 ASCII Text, VRML2 Text, and FontStyle nodes). See also: ■ “VRML File Reader Options” on page 301 Z+F Scan File Reader The file reader supports files from all Z+F™ IMAGER scanners.
To add the ARX plugin to Exporter Plugins installation 1 In the Control Panel, double-click Add or Remove Programs. 2 In the Add or Remove Programs dialog box, click Autodesk Navisworks Review 2010 Exporter Plugins, and then click Change/Remove in Windows XP or Uninstall/Change in Vista. 3 In the Installation wizard, click Add or Remove Features. 4 On the Select Exporters to Install page, the Export From Other Applications node, select the check box next to the required plugin. 5 Click Next.
NOTE For AutoCAD 20xx based applications, this file is located under C:\Program Files\Common Files\Autodesk Shared\Navisworks\2010\NWExport20xx\lwnw_export.mnu. So, for example, for AutoCAD 2004 based applications, this file is located under C:\Program Files\Common Files\Autodesk Shared\Navisworks\2010\NWExport2004\lwnw_export.mnu, and so on. 5 Click Open. 6 In the Load/Unload Customizations dialog box, click Load. The loaded menu is shown in the Loaded Customization Groups. 7 Click Close.
Button Description ically. Click this button every time you want to navigate around the latest model. Changes the current AutoCAD view to the view in the Navigator window. Changes the view in the Navigator window to the current AutoCAD view. Selects walk mode and enables you to walk through the model on a horizontal plane. Selects look around mode and enables you to look around the model from the current camera position. Selects zoom mode.
Button Description LEFT ARROW and RIGHT ARROW keys spin the camera left and right respectively. Holding down the SHIFT key speeds up this movement. Holding down the CTRL key rotates the camera around its viewing axis, while still moving forward. Selects turntable mode. Dragging the left mouse button left and right, or using the LEFT ARROW and RIGHT ARROW keys spins the turntable left and right respectively. Holding down the SHIFT key or spinning the mouse wheel, temporarily switches this mode to zoom mode.
■ Head Light - uses a single directional light located at the camera that always points in the same direction as the camera. This is the default option. ■ Scene Lights - uses any lights defined in the model, or two default opposing lights, if none are available. Navigation Mode Selects navigation mode. The options available here are the same as on the Navigator toolbar, with one exception. The Select option enables you to select items in your model.
MicroStation File Exporter Autodesk Navisworks comes with MDL plugins for MicroStation™ 95, SE, /J and v8 , and enables you to export files into NWC file format. NOTE If you installed the Autodesk Navisworks software with exporter plugins, and you install MicroStation software after Autodesk Navisworks is installed, you need to update your exporter plugins installation with the appropriate ARX plugins before you can use them.
To use the key-in command line to export files 1 Click Utilities ➤ Key-In to open the Key-In dialog box. 2 To export an NWC file, type nwcout. NOTE To export the current design file quickly, you can use the batchnwcout command. The exporter replaces the design file extension (usually .dgn) with .nwc when exporting the file. When you use this commands, you are not prompted to overwrite any existing files, and no export dialog box is shown.
NOTE Paths must be separated with a semicolon (;). 5 Click OK to save the changes and close the dialog boxes. To use the command line to export files 1 On the Start menu, click Run in Windows XP or press Windows + R on the keyboard in Vista. 2 Enter the file export command with appropriate arguments, for example msbatch nwexport7 file. 3 Press Enter. 4 In the MicroStation Manager dialog box, select the files you want to export, file extension (.nwc), and storage location. 5 Click OK.
NOTE Any textures applied to the Viz or Max model are saved in a directory with the same name as the exported file, but with a _presenter_maps suffix. All textures are converted into .bmp files and saved into this directory for use with Navisworks. Add the Navisworks utility menu 1 Click the More button on the Utilities panel. 2 In the Utilities dialog box, select Navisworks 2010 option, and click OK.
2 In the Save As dialog box, select Navisworks 7 (*nwc) in the Save As Type field. 3 Enter the name for the Navisworks file, and browse to the desired storage location. 4 Click Save to begin the export process. 5 In the Export dialog box adjust the file exporter options: ■ Export GUIDs - select this check box to attach a Globally Unique IDentifier as a property to each item in the model. In Navisworks, GUIDs are used by the Clash Detective to track clashes.
Manage Files Open Files To open files in Autodesk Navisworks, you can either use a standard Open dialog box or drag and drop files directly to the Selection Tree control bar. NOTE If the chosen file is a CAD or laser scan file, Autodesk Navisworks automatically uses an appropriate file reader to open it, provided this file format is supported. Autodesk Navisworks keeps a list of recently opened files (by default, up to 4 files are shown). You can open any of these files by clicking Files ➤ Recent Files.
On the other hand, whenever you need to share the scene you created and review markups with others, it is best to distribute a published NWD file, which includes additional features such as password protection and file expiration date. The published files can be viewed in both Autodesk Navisworks Review 2010 and Autodesk Navisworks Freedom 2010 (a free viewer). IMPORTANT When you publish an NWD file, you cannot include any RPCs added to your scene. To save a file 1 Click File ➤ Save.
3 Click Save. To publish an NWD file 1 Open the file that you want to publish (NWD or NWF). 2 Click File ➤ Publish. 3 Use the Publish dialog box to enter the document information, and specify the required document protection. 4 Click OK. 5 In the Save As dialog box, enter the file name, and specify the file location. 6 Click Save. Your file is now published.
Complex Models You can use Navisworks files to build complex models. When you bring files from different sources into the same scene, Autodesk Navisworks automatically aligns rotation and origin of models, and rescales the units in each file to match display units. If the rotation, origin, or file units are incorrect for the scene, you can manually adjust them for each of the opened files. Append Files To add more models to an existing scene, you need to append model files.
To change file units in a loaded file 1 Click the desired file in the Selection Tree. 2 Click Edit ➤ File Units and Transform. 3 In the File Units and Transform dialog box, select the required format in the Units drop-down list. 4 Click OK. To change a file transform in a loaded file 1 Click the desired file in the Selection Tree. 2 Click Edit ➤ File Units and Transform. 3 To move the model’s location, in the File Units and Transform dialog box, the Origin area, enter values for the X, Y and Z axis.
6 Click OK. Refresh Files When working in Autodesk Navisworks, it is possible that others may be working on the CAD files you are currently reviewing. For example, if you are coordinating various disciplines on a project, then you may have an NWF file referencing numerous design files. During the iterative stages of the project, any member of the design team could potentially be modifying their CAD files.
Email Files You can send and receive Navisworks files by email. To send an open Autodesk Navisworks file, click File ➤ Send. Autodesk Navisworks saves your file first, and then opens the available mail software and attaches your file to a blank email message. You can email both NWD and NWF files, although the size of an NWD file will be considerably larger. Toolbar: Standard ➤ Send Receive 3D Mail To open a received file, save the attachment on your disk, and then double-click it.
124 | Chapter 5 Work with Files
Explore Your Model Autodesk Navisworks Review 2010 enables you to walk through a scene in real time. 6 View Scene Statistics Scene statistics display information about the current scene. Scene statistics list all files contributing to the scene, and the different graphic elements that make up the scene, along with which of these have been processed or ignored when loaded.
Animating Navigation As you navigate in Autodesk Navisworks, you can record viewpoint animations, and then play them back. For more information, see “Record and Play Animations” on page 251. Orientation in 3D Space Although Autodesk Navisworks uses the X, Y, Z coordinate system, there is no hard-and-fast rule as to which way each of these particular axes actually 'points'.
3 Click OK. Navigation Modes There are nine navigation modes available from the Navigation Mode toolbar to control how you move around the Scene Area- six camera-centric modes and three model-centric modes. In a camera-centric mode, the camera moves within the scene, whereas in a model-centric mode, model moves inside the scene.
Mode Description Look Around. Enables you to look around the model from the current camera position and gives the effect that you are moving your head around. Zoom. Enables you to zoom into and out of the model. Cursor up zooms in and cursor down zooms out. Zoom to a Box. Enables you to drag a box so that the contents of the box fill the view. Pan. Enables you to pan the model rather than the camera. Orbit. Enables you to orbit the camera around the model, ensuring that “up” is always “up”.
3 To glide, hold down the CTRL key as you drag the mouse. The camera glides left and right and up and down. As walk mode is camera-centric, this mode differs from the normal pan mode in that the camera is moved rather than the model. 4 To tilt the camera up and down, spin the mouse wheel. Menu: Viewpoint ➤ Navigation Mode ➤ Walk Command entry: CTRL + 2 Look Around Mode In look around mode, you can rotate the current view vertically and horizontally.
Zoom Box Mode In zoom box mode, you can zoom in to an area of the model by dragging a rectangular box around the area you want to fit in the Scene Area. To zoom in to an area of the model by specifying box 1 Click Zoom Box on the Navigation Mode toolbar. 2 Drag a box with the left mouse button over the Scene Area to fill the view with the contents of the box. NOTE Holding down the Shift or Control keys, or spinning the mouse wheel, temporarily enables normal zoom mode.
To orbit a model 1 Click Orbit on the Navigation Mode toolbar. 2 To rotate the camera around the model, drag the left mouse button, or using the cursor keys. NOTE Holding down the SHIFT key, or spinning the mouse wheel, temporarily enables normal zoom mode. 3 To glide the camera, hold down the CTRL key as you drag the mouse. The camera glides left and right and up and down. As orbit mode is camera-centric, this mode differs from normal pan mode in that the camera is moved rather than the model.
To use fly mode to move through the model 1 Click Fly on the Navigation Mode toolbar. 2 Hold down the left mouse button to move the camera forward. As in a flight simulator, the left mouse button banks left/right when dragged left or right and tilts up/down when dragged up or down. NOTE Holding down the SHIFT key speeds up this movement. 3 Use the up and down cursor keys to zoom the camera in and out respectively; use the left and right cursor keys to spin the camera left and right respectively.
SteeringWheels SteeringWheels™ are tracking menus that follow your cursor, and from which you can access diferent 3D navigation tools from a single tool. Overview of SteeringWheels SteeringWheels, also known as wheels, can save you time by combining many of the common navigation tools into a single interface. Wheels are specific to the context from which a model is being viewed.
big wheel is larger than the cursor, and labels are shown on the wheel wedges. The mini wheel is about the same size as the cursor, and labels are not displayed on the wheel wedges. Mini Full Navigation Wheel Big Full Navigation Wheel The size of a wheel controls how large or small the wedges and labels appear on the wheel; the opacity level controls the visibility of the objects in the model behind the wheel.
4 Click OK. To control the startup placement of a wheel 1 Display a wheel. 2 Right-click the wheel, and click SteeringWheels Options. 3 In the Options Editor, the SteeringWheels page under the Interface node, select the Always Show the Pinned Wheel on Startup check box. When this option is selected, the wheel is pinned to the window at startup. When this check box is clear, the wheel follows the position of the cursor at startup. 4 Click OK. To enable tooltips for wheels 1 Display a wheel.
Quick Reference The Wheel menu has the following options: ■ View Object Wheel. Displays the big View Object wheel. ■ Tour Building Wheel. Displays the big Tour Building wheel. ■ Full Navigation Wheel. Displays the big Full Navigation wheel. ■ Advanced Wheels. Displays the mini View Object, Tour Building, or Full Navigation wheel. ■ Go Home. Goes to the Home view saved with the model. NOTE This is the Home view as set using the ViewCube. ■ Fit to Window.
Big View Object Wheel The big View Object wheel wedges have the following options: ■ Center. Specifies a point on a model to adjust the center of the current view or change the target point used for some of the navigation tools. ■ Zoom. Adjusts the magnification of the current view. ■ Rewind. Restores the most recent view orientation. You can move backward or forward by clicking and dragging left or right. ■ Orbit. Rotates the current view around a fixed pivot point.
Big Tour Building Wheel The big Tour Building wheel wedges have the following options: ■ Forward. Adjusts the distance between the current point of view and the defined pivot point of the model. Clicking once moves forward half the distance as far as the object you clicked. ■ Look. Swivels the current view. ■ Rewind. Restores the most recent view. You can move backward or forward by clicking and dragging left or right. ■ Up/DownTool. Slides the current view of a model along the Z axis of the model.
Big Full Navigation Wheel The big Full Navigation wheel wedges have the following options: ■ Zoom. Adjusts the magnification of the current view. ■ Rewind. Restores the most recent view. You can move backward or forward by clicking and dragging left or right. ■ Pan. Repositions the current view by panning. ■ Orbit. Rotates the current view around a fixed pivot point. ■ Center.
Control Navigation Realism You can use collision, gravity, and crouching with the Walk tool. This allows you, for example, to walk up and down stairs and walk under low objects. You can also use the third person view with SteeringWheels to enhance your navigation experience. However, the avatar is only shown when you use the Walk tool, and the Pan tool to prevent cluttering of the screen. Center Tool With the Center tool, you can define the center of the current view of a model.
Forward Tool You use the Forward tool to change the magnification of the model by increasing or decreasing the distance between the current point of view and the pivot point. The distance that you can move forward or backward is limited by the position of the pivot point. NOTE In orthographic views, the Forward tool is limited to the distance between the current position and the pivot point. In perspective views, it is not limited, so you can move the cursor through the pivot point.
In addition to using the Look tool to look around a model, you can also use the tool to pan the current view to a specific face on the model. Press and hold the SHIFT key before selecting the Look tool on one of the Full Navigation wheels. Walking Through a Model When using the Look tool from the big Full Navigation wheel, you can walk through a model by using the arrow keys on the keyboard. To adjust the walk speed, use the Options Editor.
Orbit Tool You use the Orbit tool to change the orientation of a model. The cursor changes to the Orbit cursor. As you drag the cursor, the model rotates around a pivot point while the view remains fixed. Specify the Pivot Point The pivot point is the base point used when rotating the model with the Orbit tool. You can specify the pivot point in the following ways: ■ Default pivot point. When you first open a model, the target point of the current view is used as the pivot point for orbiting the model.
To orbit a model with the Orbit tool 1 Display one of the View Object or Full Navigation wheels. 2 Click and hold down the Orbit wedge. The cursor changes to the Orbit cursor. 3 Drag to rotate the model. NOTE Use the Center tool to re-center the model in the current view, if you are using one of the Full Navigation or View Object wheels. 4 Release the button on your pointing device to return to the wheel.
5 Click and hold the Orbit wedge. The cursor changes to the Orbit cursor. 6 Press and hold the SHIFT key to display the roll ring. Drag to roll the model. 7 Release the button on your pointing device to return to the wheel. To start the Orbit tool with the middle mouse button 1 Display one of the wheels other than the big View Object or Tour Building wheels. 2 Press and hold down the SHIFT key. 3 Press and hold down the scroll wheel or middle button on your pointing device and drag to orbit the model.
Rewind Tool As you use the navigation tools to reorient the view of a model, the previous view is saved to the navigation history. The navigation history holds a representation of the previous views of the model along with a thumbnail. A separate navigation history is maintained for each window; it is not maintained after the window is closed. Rewind navigation history is view-specific. With the Rewind tool, you can retrieve previous views from the navigation history.
To change the elevation of a view 1 Display one of the Full Navigation wheels or the Tour Building wheels. 2 Click and hold down the Up/Down wedge. The Vertical Distance indicator is displayed. 3 Drag up or down to change the elevation of the view. 4 Release the button on your pointing device to return to the wheel. Walk Tool With the Walk tool, you can navigate through a model as if you were walking through it.
To use the Walk tool to move through the model 1 Display one of the Full Navigation wheels or the mini Tour Building wheel. 2 Click and hold down the Walk wedge. The cursor changes to the Walk cursor and the Center Circle icon is displayed. 3 Drag in the direction you want to walk. NOTE While walking, press and hold down the + (plus) key to temporarily increase your movement speed. 4 Release the button on your pointing device to return to the wheel.
NOTE When you start the Zoom tool from the Full Navigation wheel, incremental zooming must be enabled in the Options Editor in order to use CTRL+click and SHIFT+click. Zoom Constraints When changing the magnification of a model with the Zoom tool, you cannot zoom in any further than the focus point or out past the extents of the model. The direction you can zoom in and out is controlled by the center point set by the Center tool.
4 Drag the pointing device to define the opposite corner of the window that defines the area in which you want to zoom. NOTE Holding down the CTRL key while defining the second point of the window determines if the first point of the window is used as the corner or center of the window being dragged. When the CTRL key is held down, the first point defines the center of the window. 5 Release the button on your pointing device to return to the wheel.
Camera Projection You can choose to use a perspective camera or an orthographic camera during navigation. NOTE Orthographic cameras are not available with walk and fly navigation modes. To use a perspective camera ➤ Click Perspective on the Navigation Tools toolbar. Menu: Viewpoint ➤ Navigation Tools ➤ Perspective To use an orthographic camera ➤ Click Orthographic on the Navigation Tools toolbar.
Predefined Camera Views In Autodesk Navisworks, you can align a camera to one of the axis, or select one of six predefined face views to instantly change the camera’s position and orientation in the scene. When you align the camera position along one of the axis: ■ Aligning with X axis toggles between front and back face views. ■ Aligning with Y axis toggles between left and right face views. ■ Aligning with Z axis toggles between top and bottom face views.
When you display the ViewCube, it is shown in the top- right corner of the Scene Area over the model in an inactive state. While the ViewCube tool is inactive, it provides visual feedback about the current viewpoint of the model as view changes occur. When the cursor is positioned over the ViewCube tool, it becomes active; you can switch to one of the available preset views, roll the current view, or change to the Home view of the model.
3 Click OK. To control the inactive opacity of the ViewCube 1 Right-click the ViewCube tool, and click ViewCube Options. 2 In the Options Editor, the ViewCube page under the Interface node, select an option from the Inactive Opacity drop-down list. 3 Click OK. To display the compass for the ViewCube 1 Right-click the ViewCube tool, and click ViewCube Options. 2 In the Options Editor, the ViewCube page under the Interface node, select Show Compass Below the ViewCube. 3 Click OK.
■ Perspective. Switches the current view to perspective projection. ■ Lock to Selection. Uses the selected objects to define the center of the view when a view orientation change occurs with the ViewCube tool. NOTE If you click Home on the ViewCube tool, the view returns to the Home view even if Lock to Current Selection is selected. ■ Set Current View as Home. Defines the Home view of the model based on the current view. ■ Set Current View as Front.
Switch to an Adjacent Face When the ViewCube tool is active while viewing a model from one of the face views, four orthogonal triangles are displayed near the ViewCube tool. You use these triangles to switch to one of the adjacent face views. Front View You can define the Front view of a model to define the direction of the face views on the ViewCube tool. Along with the Front view, the up direction of a model is also used to define the direction of the face views on the ViewCube tool.
To use animated transitions when reorienting a view to a preset orientation 1 Right-click the ViewCube tool, and click ViewCube Options. 2 In the Options Editor, the ViewCube page under the Interface node, select Use Animated Transitions When Switching Views. 3 Click OK. To automatically fit the model after a view orientation 1 Right-click the ViewCube tool, and click ViewCube Options. 2 In the Options Editor, the ViewCube page under the Interface node, select Fit-to-View on Change. 3 Click OK.
The left roll arrow rotates the view 90 degrees counterclockwise; the right roll arrow rotates the view 90 degrees clockwise. To define the front view ■ Right-click the ViewCube tool, and click Set Current View as Front. To restore the Front view ■ Right-click the ViewCube tool, and click Reset Front. Set the View Projection Mode The ViewCube tool supports two different view projections: perspective and orthographic. Orthographic projection is also referred to as parallel projection.
To reorient the model to the Home view ■ Click the Home button ( ) located near the ViewCube tool. Examine Individual Objects with ViewCube You can lock the ViewCube tool to a set of selected objects. Locking a selection of objects to the ViewCube tool defines the center of the current view and the distance from center for the view based on the selected objects.
The thumbnails show a fixed view of the model. By default, the section thumbnail shows the view from the front of the model and the plan thumbnail shows a top view of the model. Thumbnail views are displayed inside the control bars. A triangular marker represents your current viewpoint. This marker moves as you navigate, showing the direction of your view. The marker may also be dragged by holding the left mouse button over it and dragging to move the camera in the Scene Area.
Quick Reference Right-clicking the Section View or the Plan View control bar opens the shortcut menu with the following options. Option Description Look From Enables you to set the thumbnail view to one of the preset viewpoints. Choose from: Top, Bottom, Front, Back, Left, Right, or Current Viewpoint. Selecting the Current Viewpoint option sets view in the thumbnail to the active navigation viewpoint. Update Current Viewpoint Sets the active navigation viewpoint to the view in the thumbnail.
To view selected items ➤ Click View Selected on the Navigation Tools toolbar. Menu: Viewpoint ➤ Navigation Tools ➤ View Selected Shortcut menu: Scene ➤ View Selected Focus You can put the Scene View into focus mode until the next click. When you are in focus mode, clicking on an item swivels the camera so that the point clicked is in the center of the view. This point becomes the focal point for examine, orbit, and turntable navigation modes. To focus ➤ Click Focus on the Navigation Tools toolbar.
To toggle gravity ➤ In walk navigation mode, click Gravity on the Navigation Tools toolbar. Menu: Viewpoint ➤ Navigation Tools ➤ Gravity Command entry: CTRL + G Crouching NOTE This function only works in connection with collision. When walking or flying around the model with collision activated, you may encounter object that are too low to walk under, a low pipe for example. This function enables you to crouch under any such objects.
To toggle collision ➤ In walk or fly navigation mode, click Collision on the Navigation Tools toolbar. Menu: Viewpoint ➤ Navigation Tools ➤ Collision Command entry: CTRL + D Third Person View This function allows you to navigate scene from a third person perspective. When third person is activated, you will be able to see an avatar which is a representation of yourself within the 3D model. Whilst navigating you will be controlling the avatar's interaction with the current scene.
4 Browse to the Autodesk Navisworks installation directory, for example: C:\Program Files\Autodesk\Navisworks Review 2010\avatars\my_new_folder_name. 5 Type in the new name for your avatar file, and click Save. 6 Restart Autodesk Navisworks, and open any file. 7 Click Tools ➤ Global Options. 8 In the Options Editor, expand the Interface node, and click the Viewpoint Defaults option. 9 Click the Settings button. 10 In the Default Collision dialog box, slect the Enable check box in the Third Person area.
To toggle ViewCube ➤ Click View ➤ Head-Up Display ➤ ViewCube.
Control Model Appearance and Render Quality 7 You can control both the appearance of the model in the Scene Area and the quality of rendering in real time. Control Model Appearance You can use the Rendering Styles toolbar to control how your model is displayed in the Scene Area.
Full Render In full render mode, the model is rendered with smooth shading including any materials that have been applied using the Presenter tool, or have been brought through from the native CAD file. NOTE Autodesk Navisworks does not convert all native CAD file's textures. For more details, see “Use File Readers” on page 91 and “Use File Exporters” on page 106. To select full render mode ■ Click Full Render on the Rendering Style toolbar.
No Lights This mode switches off all lights. The scene is shaded with flat rendering. To turn off all lights ■ Click No Lights on the Rendering Style toolbar. Menu: Viewpoint ➤ Lighting ➤ No Lights Head Light This mode uses a single directional light located at the camera that always points in the same direction as the camera. You can customize the head light properties in the File Options dialog box. To use head light mode ■ Click Head Light on the Rendering Style toolbar.
TIP Turning on head light mode before following this procedure lets you instantly see the effect your changes have on the scene rendering. 4 Click OK. Scene Lights This mode uses the lights that have been brought through from the native CAD file. If no lights are available, two default opposing lights are used instead. You can customize the intensity of scene lights in the File Options dialog box. To use lights defined with the model ■ Click Scene Lights on the Rendering Style toolbar.
Plain background ■ Graduated - the background of the 3D scene is filled with a smooth gradient between the two selected colors. Graduated background ■ Horizon - the background of the 3D scene is split across the horizontal plane giving the effect of a sky and the ground. The resulting artificial horizon gives you an indication of your orientation in the 3D world. By default, the artificial horizon respects the world up vector as set in File Options ➤ Orientation.
4 Select the second color from the Bottom Color palette. 5 Review the new background effect in the preview box, and click OK. To set an artificial horizon background 1 Click Tools ➤ Background. 2 In the Background Settings dialog box, select Horizon in the Mode drop-down list. 3 To set a graduated sky color, use the Sky Color and Horizon Sky Color palettes. 4 To set a graduated ground color, use the Horizon Ground Color and Ground Color palettes.
Points Points are real points in the model, for example, the points in a point cloud in a laser scan file. You can toggle the rendering of points in the model. You can also change the size of drawn points by using the Options Editor. To toggle the rendering of points ■ Click Points on the Rendering Style toolbar. Menu: Viewpoint ➤ Display ➤ Points To change the size of points 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, and click the Display option.
Control Render Quality Use Culling Culling lets you navigate and manipulate large and complex scenes at interactive rates by intelligently hiding less-important objects as you work. In Autodesk Navisworks, you can use the following methods of culling objects: ■ Area - the objects’ size in pixels determines whether the objects are rendered or not. By default, any objects smaller than 1x1 pixels in size are discarded.
5 Click OK. Autodesk Navisworks automatically controls the position of near and far clipping planes to give you the best view of the model. To constrain the position of the clipping planes manually 1 Click Tools ➤ File Options. 2 In the File Options dialog box, click the Culling tab. 3 Select Constrained for the Near clipping plane, and enter the desired value in the Distance box. 4 Select Constrained for the Far clipping plane, and enter the desired value in the Distance box. 5 Click OK.
Control Rendering of Objects Adjust Scene Rendering During Navigation Your models can range in size from small models to complex supermodels. As you navigate a scene in real time, Autodesk Navisworks automatically calculates which items to render first, based on the size of items, distance from the camera, and the specified frame rate. This customizable frame rate is guaranteed by default, but can be turned off, if necessary. Items that Autodesk Navisworks does not have time to render are dropped out.
4 Click OK. To render parametric primitives NOTE Modifying this option requires a restart of Autodesk Navisworks to take effect. 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, and click the Display option. 3 On the Display page, Primitives area, select the Enable Parametric Primitives check box. The level of detail changes during navigation depending on the distance from the camera. If you want to use the default representations of primitives, clear this check box.
See also: ■ “Presenter Page” on page 306 Stereo Rendering Stereoscopic viewing in Autodesk Navisworks allows the viewing of the 3D model through stereo-enabled hardware, including active and passive stereo viewing glasses in conjunction with both CRT screens and dedicated projectors. IMPORTANT Using stereo rendering requires the host computer have an OpenGL graphics card with stereo support.
Review Your Model 8 Select Objects With large models it is potentially a very time-consuming process to select items of interest. Autodesk Navisworks makes this a much simpler task by providing a range of functions for quickly selecting geometry both interactively and by searching the model manually and automatically. Interactive Geometry Selection In Autodesk Navisworks, there is a concept of an active selection set (the currently selected items, or the current selection) and saved selections sets.
Autodesk Navisworks uses this hierarchical structure to identify object-specific paths (from the file name down to a particular object). By default there are four tabs: ■ Standard. Displays the default tree hierarchy, including all instancing. The contents of this tab can be sorted alphabetically. ■ Compact. Displays a simplified version of the hierarchy on the Standard tab, omitting various items. You can customize the level of complexity of this tree in the Options Editor. ■ Properties.
2 Click an object in the Selection tree to select the corresponding geometry in the Scene Area. NOTE When you select an item in the tree, individual geometry or a group of geometry is selected in the Scene Area depending on chosen selection resolution. 3 To select several items at the same time, use the SHIFT and CTRL keys. CTRL allows multiple selection item by item, and SHIFT allows multiple selection between the first and last items selected.
Icon Description A composite object. A single CAD object that is represented in Autodesk Navisworks by a group of geometry items. Saved selection set. Saved search set. Selection Modes There are two selection modes available from the Selection Tools toolbar to control how you select geometry. As standard, selection modes are mutually exclusive to navigation modes, and SteeringWheels, so that when you are selecting you cannot navigate and vice versa.
4 To remove items from the current selection, press the ESC key. To set the pick radius 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, and click the Selection option. 3 On the Selection page, enter the radius in pixels that an item has to be within in order to be selected. The valid values are between 1 and 9. 4 Click OK. Selection Commands Selection commands enable you to quickly alter the current selection using logic.
If you find you have selected the wrong level of item, you can interactively cycle through the selection resolution, without having to go to the Options Editor or the Selection Tree. You can do this by holding down the SHIFT key when clicking an item. This selects an item one level more specific each time you click the item until the resolution gets to "geometry", at which point it reverts back to "model".
■ Tinted To toggle highlighting of selected objects 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, and click the Selection option. 3 On the Selection page, Highlight area, select the Enabled check box, if you want the selected items to be highlighed in the Scene Area. Clear this check box, if you don’t want any highlighting. 4 Click OK. To customize the way objects are highlighted 1 Click Tools ➤ Global Options.
NOTE In the Selection Tree, the items appear gray when marked as hidden. To make selected objects hidden 1 In the Scene Area, select all items you want to hide. 2 Click Hidden on the Selection Tools toolbar. The selected objects are now invisible. TIP Clicking Hidden again displays the invisible objects. Menu: Edit ➤ Hidden Command entry: CTRL + H Shortcut menu: Hidden To make unselected items hidden 1 In the Scene Area, select all items you want to review.
The left pane contains the Find Selection Tree with several tabs at the bottom, and enables you to select the level of item to start searching at; this can be a file, a layer, an instance, a selection set, and so on. The tabs are the same as on the Selection Tree window: ■ Standard. Displays the default tree hierarchy, including all instancing. ■ Compact. Displays a simplified version of the tree hierarchy. ■ Properties. Displays the hierarchy based on the items' properties. ■ Sets.
important, especially if you choose to negate some statements. For example, "(A AND B) OR (C AND NOT D)". When search conditions are evaluated, NOT is applied before AND, and AND is applied before OR. To toggle the Find Items window ■ Click Find Items on the Workspace toolbar. Menu: View ➤ Control Bars ➤ Find Items Command entry: SHIFT + F3 To find objects 1 Open the Find Items window. 2 On the Find Selection Tree, click the items where you want to start searching from.
Quick Reference Search Options Category Selects the category name. Only the categories that are contained in the scene are available in the drop-down list. Property Selects the property name. Only the properties in the scene within the category chosen are available in the drop-down list. Condition Selects a condition operator for your search. You can use the following operators depending on the property you are searching for: ■ =. Equals; can be used to evaluate any type of property.
Search Conditions Shortcut Menu Ignore String Value Case Makes the selected search statement case-insensitive (for example, both ‘Chrome’ and ‘chrome’ materials are treated as qualifying). Ignore Category User Name Instructs Autodesk Navisworks to use internal category names and ignore the user category names for the selected search statement. Ignore Category Internal Name Instructs Autodesk Navisworks to use user category names and ignore the internal category names for the selected search statement.
items for later retrieval. There is no intelligence behind this set - if the model changes at all, the same items are selected (assuming they are still available in the model) when recalling the selection set. Search Sets Search sets are dynamic groups of items, and work in a similar way to selection sets, except that they save search criteria instead of the results of a selection, so that you can re-run the search at a later date as and when the model changes.
To change the sort order on the Selection Sets window 1 Open the Selection Sets window. 2 Right-click any item in the list, and click Sort. The contents of the tab is now ordered alphabetically. Quick Reference The Selection Set shortcut menu has the following options: ■ New Folder. Creates a folder above the selected item. ■ Add Current Selection. Saves the current selection as a new selection set in the list. This set contains all currently selected geometry. ■ Add Current Search.
2 Click the Find All button to run the search. All items that satisfy your criteria are now selected in the Scene Area and the Selection Tree. 3 Open the Selection Sets window, right-click, and click Add Current Search. 4 Type a name for your search set, and press ENTER Menu: Edit ➤ Select ➤ Selection Sets ➤ Add Current Search To rename a search or selection set 1 Open the Selection Sets window. 2 Right-click the desired search or selection set, and click Rename.
To import search sets 1 Click File ➤ Import ➤ Search Sets XML. 2 In the Import dialog box, brose to the folder containing the file with the search sets, and select it. 3 Click Open. Compare Objects You can look for differences between any two selected items in the scene. These items can be files, layers, instances, groups, or just geometry. You can also use this feature to investigate the differences between two versions of the same model.
7 Click OK. To compare two items in the model 1 Select exactly two items in the scene. 2 Click Tools ➤ Compare. 3 Use the Compare dialog box to set up the comparison search. 4 Click OK. Object Properties Autodesk Navisworks supports the conversion of object properties for many file formats. For more details on supported/unsupported entities, see “Use File Readers” on page 91. Properties Window Once brought into Autodesk Navisworks, the object properties can be examined in the Properties window.
To toggle the Properties window ■ Click Properties on the Workspace toolbar. Menu: View ➤ Control Bars ➤ Properties Command entry: SHIFT + F7 To examine object’s properties 1 Select the object of interest in the Selection Tree, or in the Scene Area. 2 Open the Properties window, and use the tabs to navigate between the available property categories. NOTE If more than one object is selected, the Properties window only shows the number of selected items, and doesn’t show any property information.
2 Select the object of interest in the Scene Area or on the Selection Tree. 3 Right-click the Properties window, and click Add New User Data Tab. The new property category is added for the currently selected object. By default, the tab is called User Data. To rename a custom property tab 1 Open the Properties window. 2 Click the custom tab you want to rename. 3 Right-click the properties area, and click Rename Tab. 4 Enter a new name for the tab in the box provided. 5 Click OK.
2 Click the custom tab where the property you want to delete is located. 3 Right-click the property, and click Delete Property. External Database Links Databases are commonly used to store large amount of data, such as equipment specifications, catalogue data, and maintenance manuals. You can connect to external databases directly from your Navisworks files, and create links between objects in the scene and fields in the database tables to bring through extra properties.
2 If you want to add a database link globally: a Click Tools ➤ DataTools. b In the DataTools dialog box, click the New button. 3 In the New Link dialog box, enter a Name for the new link, for example, 'Service Information'. This is the name of the tab that will appear on the Properties window. You are now ready to configure the database link. 4 Click OK to save the link and return to the previous dialog box.
NOTE If you haven't added any links yet, click the New button, and follow the procedure for adding database links first. 2 To configure a global database link: a Click Tools ➤ DataTools b In the DataTools dialog box, click the link you want to configure in the DataTools Links area, and click the Edit button. NOTE If you haven't added any links yet, click the New button, and follow the procedure for adding database links first.
b Click the Setup button. The driver wizard opens, and guides you through the setup options. If you have difficulties setting up your connection details, contact your database administrator. When you finish, the box underneath will show the connection string. This string can be modified, if necessary. For example, if you want to select a database with a certain name (say, test.
2 To delete a global database link: ➤ Click Tools ➤ DataTools. 3 In the DataTools dialog box, click the link you want to remove in the DataTools Links area, and click the Delete button. 4 Click OK. To activate a database link 1 To activate a file-based database link: a Click Tools ➤ File Options. b In the File Options dialog box, DataTools tab, select the check boxes for all links you want to activate in the DataTools Links area. 2 To activate a global database link: a Click Tools ➤ DataTools.
4 Click Save. 5 Click OK to close the File Options dialog box. To import a database link 1 Click Tools ➤ File Options. 2 In the File Options dialog box, DataTools tab, click the Import button. 3 In the Open dialog box, browse to the folder containing the required datatools file, select it, and click Open.
4 Click OK to close the File Options dialog box. Quick Reference You can use the following Navisworks tags with SQL queries: Property Tags %prop("category","property") Property of the currently selected object. Category is the name of the tab in the property windows (for example, Item or Entity Handle) and property is the name of the property in that tab (for example, Value or Layer). %intprop("category","property") Property of the currently selected object.
Query Examples The examples below illustrate how tags could be used with SQL queries.
When you use gizmos, you can adjust snapping to control the precision of your operations. Using Measure Tools to Transform Objects You can use the Measure Tools functionality to move and rotate the currently selected objects. To move an object with the translation gizmo 1 Select the object you want to move in the Scene Area. 2 Click Translate Item on the Object Manipulation toolbar.
4 Click OK. To move an object with a measure tool 1 Select the object you want to move. 2 Open the Measure Tools window, and click Point Line . 3 Click the selected object to create the first point. This is the start point from which the repositioning will be calculated. 4 Click the second point in the scene. This is the point where the object will be moved to. There is now a line connecting the start point and the end point in the Scene Area.
■ Once the rotation gizmo is positioned correctly, place the mouse over one of the curves in the middle, and drag it on the screen to rotate the selected objects. The curves are color-coded, and match the color of the axis used to rotate the object around. So, for example, dragging the blue curve between the X and Y axes, rotates the objects around the blue Z axis.
3 Use the scale gizmo to resize the currently selected object: ■ To resize all currently selected objects, place the mouse over one of seven squares. When the cursor , drag the square on the screen to modify the size of the objects. Typically, dragging a changes to square up or right increases the size, dragging it down or left decreases the size. ■ To resize the objects across a single axis only, use colored squares at the end of the axes.
Points and snap points are automatically snapped to. You can set the cursor to snap to the nearest vertex, edge, or line when you pick geometry. You can also adjust the snapping angle and the snapping tolerance that are used when you rotate geometry. Different cursors feed back what is being snapped to: Cursor Description No snap, but a point on a surface is found. A vertex, point, snap point or line end is found to snap to. An edge is found to snap to.
To reset transform for all objects in your scene ■ Click Edit ➤ Reset All ➤ Reset Transforms. Measure Tools Measure tools enable you to measure between points on items in the model. All measurements are made in display units. Using measure tools is mutually exclusive to using navigation modes and SteeringWheels, so that when you are measuring you cannot navigate and vice versa.
Button Description Calculates an angle between two lines. Calculates an area on a plane. Measures the shortest distance between two selected objects. Clears all measuring lines in the Scene Area. Enables you to move or rotate an object. Converts the endpoint markers, the lines, and any displayed measurement values into redlines. Measuring You can use measuring tools to make linear, angular, and area measurements, and to automatically measure the shortest distance between two selected objects.
Dimension Labels For distance-based measurements, the dimension label is drawn for each line segment. For accumulative measurements, the dimension label shows the totals, and is drawn for the last line segment. The text is positioned relative to the center point of the line. For anglular measurements, an arc indicator is shown inside the angle, with the centre of the text positioned on the invisible line bisecting the angle. If an angle is too accute, the label is drawn outside the angle.
2 Click the start point, and the first end point to be measured. A measuring line is displayed between two points. 3 Click to register the next end point to be measured. 4 Repeat this to measure additional end points if required. The Distance box, and the optional dimension label always display the last measured distance. Your start point stays the same throughout. TIP If you want to change the start point, right-click in the Scene Area, and select a new start point.
2 Click the start and end points of the first distance to be measured. 3 Click the start and end points of the next distance to be measured. 4 Repeat to measure more distances if necessary. The Distance box, and the optional dimension label display the sum of all point-to-point measurements. Menu: Review ➤ Measure ➤ Accumulate To calculate an area on a plane 1 Open the Measure Tools window, and click Measure Area .
Menu: Review ➤ Measure ➤ Measure Shortest Distance To clear measuring lines ■ Open the Measure Tools window, and click Clear . Menu: Review ➤ Measure ➤ Clear To convert measurements into redlines 1 Open the Measure Tools window, and take the desired measurements, for example, distance between two points. 2 Click Convert to Redline in the Measure Tools window.
any necessary modifications are made to the drawing files, these can be reloaded into the *.nwf file, and the tag status can be changed accordingly. You can review this latest version of the NWF file, ensure all tags have been resolved and finally 'approve' them. Comments Window The Comments window is a dockable window that enables you to view and manage comments. The Comments window shows the name, time and date, author, ID, status, and subject (or first line) of each comment.
To add a comment to a selection or search set 1 Open the Selection Sets window. 2 Right-click the desired selection or search set, and click Add Comment. 3 In the Comments window, type in your comment. By default, it is assigned New status. 4 Click OK. To view comments 1 Open the Comments window. 2 Go the source of your comments. For example, open the Saved Viewpoints window. 3 As you click the source items, for example, viewpoints, the associated comments are displayed in the Comments window.
To toggle the Redline Tools window ■ Click Redline on the Workspace toolbar. Menu: Tools ➤ Redline To add a redline tag 1 Open the Redline Tools window, and click Tag . 2 In the Scene Area, click the object you want to tag. 3 Click the area where you want the tag label to be located. The redline tag is now added, and both points arejoined by a leader line. If the current viewpoint is not already saved, then it will be saved automatically and named 'Tag View X', where X is the tag ID.
To draw freehand 1 Open the Viewpoints window, and click the viewpoint that you want to review. 2 Open the Redline Tools window, and click Freehand . 3 Drag the mouse to draw in the viewpoint. Menu: Review ➤ Redline ➤ Freehand To draw a line 1 Open the Viewpoints window, and click the viewpoint that you want to review. 2 Open the Redline Tools window, and click Line . 3 Click in the viewpoint at line start and end points.
Menu: Review ➤ Redline ➤ Line String To draw an ellipse 1 Open the Viewpoints window, and click the viewpoint that you want to review. 2 Open the Redline Tools window, and click Ellipse . 3 Click and drag a box in the viewpoint to outline the ellipse. 4 Release the mouse to place the ellipse in the viewpoint. Menu: Review ➤ Redline ➤ Ellipse To draw a cloud 1 Open the Viewpoints window, and click the viewpoint that you want to review. 2 Open the Redline Tools window, and click Cloud .
Menu: Review ➤ Redline ➤ Cloud To erase redlines 1 Open the Viewpoints window, and click the viewpoint that you want to review. 2 Open the Redline Tools window, and click Erase . 3 Drag a box over the redline you want to delete, and release the mouse. Menu: Review ➤ Redline ➤ Erase To view redlines 1 Open the Viewpoints window. 2 Click the desired viewpoint. All attached redlines (if any) are displayed in the Scene Area. Quick Reference Button Description Adds text to a viewpoint.
During a review session, you can edit text, change status assigned to comments and redline tags, and delete comments and tags. You can also renumber tag and comments IDs, if necessary. Find Comments Window The Find Comments window is a floating window that enables you to search for comments and redline tags based on the comment data (text, author, ID, status), comment modification date, and the source of comment. Three tabs on the top enables you to set up the search criteria.
To find redline tags 1 Open the Find Comments window. 2 Click the Source tab, select the Redline Tags check box, and clear the rest of the check boxes. 3 Use the Comments and Date Modified tabs to restrict your search further, if required. 4 Click Find. Quick Reference Comments Tab Use this tab to restrict your search based on the comment data. If the boxes on this tab are left empty, the search returns all comments within the criteria set on the Date Modified and Source tabs.
Find Redline Tags You can search for redline tags the same way as you search for comments. You can also use a quick find functionality specifically designed to work with redline tags. To find redline tag 1 Click Review ➤ Tags ➤ Find Tag by ID. 2 In the Find Tag dialog enter the tag ID. 3 Click OK. You are automatically taken to the appropriate viewpoint. To navigate through redline tags 1 Open the Comments window. 2 Click Review ➤ First Tag.
5 Click OK. Menu: Review ➤ Comments ➤ Edit Comment To delete a comment or redline tag 1 View the comment or redline tag you want to delete in the Comments window. 2 Right-click the comment or tag, and click Delete Comment. Menu: Review ➤ Comments ➤ Delete Comment Manage IDs When you add a redline tag or comment to your scene, it is automatically assigned a unique ID.
■ Selection sets ■ Redline tags By default, all links except tags, are drawn as icons in the Scene Area. Tags are drawn as text. User-defined links enable you to customize the link categories to suit your workflow. By default, user-defined links are drawn as icons in the Scene Area. You can use the Options Editor to toggle the display of each of the link categories, and also to control their appearance.
3 On the Hyperlinks page, enter the number of links into the Max Icons box. By default, up to 25 links can be visible. 4 To hide links that appear overlapped in the Scene Area, select the Hide Colliding Icons check box. 5 In the Cull Radius box enter the desired value. Only the links located within the specified distance from the camera are drawn in the Scene Area. The default value of 0 means that all links are drawn. 6 Click OK. To hide links without comments 1 Click Tools ➤ Global Options.
4 Click OK. To customize appearance of standard links 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, expand the Hyperlinks node, and click the Standard Categories option. 3 On the Standard Categories page, use the Icon Type box to specify how you want a link to be drawn for each of the available categories. You can choose between an icon and text. By default, tag links are shown as text, and the rest of the link categories are shown as icons. 4 Click OK.
Icon Description Represent links with TimeLiner category (tasks with broken links). Represents links with viewpoints category (perspective camera mode). Represents links with viewpoints category (orthographic camera mode). Represents links with redline tags category. Represents links with selection sets category (selection sets). Represents links with selection sets category (search sets).
NOTE If you made a mistake, clicking the Clear All button deletes all attachment points associated with this link and reverts to the link being attached to the center of the item's bounding box. 7 Click OK. To add several links to the same object 1 In the Scene Area, select the desired geometry item. 2 Right-click and click Hyperlinks ➤ Add Hyperlinks. 3 Use the Add Hyperlinks dialog box to add the first link. This is the default link, and it’s the only link that will be visible in the Scene Area.
6 In the Value column, type in the property value to search for, for example, ‘Hyperlink’. 7 Click the Find All button. The search results are highlighted in the Scene Area and the Selection Tree. Manage Links You can edit original links that have been converted from the native CAD files. If you do this, then save the changes in an .nwf file, then change the hyperlink in the original CAD file, and reopen the .nwf file in Autodesk Navisworks, then your edit ‘overrides’ will remain.
NOTE You can also move links up and down the list using the Move Up and Move Down buttons, or by dragging them to their new position in the list. The link at the top of the list is the default link. 3 Click OK. To delete a link 1 In the Scene Area, right-click the default link, and click Edit Hyperlink. 2 In the Edit Hyperlinks dialog box, click the link you want to delete, and click the Delete button. 3 Click OK.
Menu: Tools ➤ Smart Tags To add a smart tag definition 1 Click Tools ➤ Global Options. 2 In the Options Editor, expand the Interface node, expand the SmartTags node, and click the Definitions option. 3 On the Definitions page, click Grid View 4 Click Add Element to display smart tag definitions as table rows. . A new row is added to the top of the table. 5 Click the Category column, and select the property category from the drop-down list, for example ‘Item.
2 Once the CAD package is running, and nwexport has been started, return to Autodesk Navisworks. 3 Click Tools ➤ Global Options. 4 In the Options Editor, expand the File Readers node, and click the DWG/DXF/SAT option. 5 On the DWG/DXF/SAT page, check that the Convert Entity Handles option is selected. 6 Select an object in the Scene Area, and click Review ➤ SwitchBack. The current Autodesk Navisworks camera view is taken back to the CAD package, and the same object is selected.
236 | Chapter 8 Review Your Model
Use Viewpoints and Sectioning Modes 9 Viewpoints are an important feature of Autodesk Navisworks. They not only allow you to save and return to views of the model which are of importance, but they can also be used for design review audit trails, and for setting up animations of the model. Create and Modify Viewpoints Overview of Viewpoints Viewpoints contain more than just the camera information - each viewpoint can also contain redlines and comments.
can jump to preset viewpoints without having to navigate each time to reach an item. The Saved Viewpoints window is a floating window that enables you to jump to preset viewpoints without having to navigate each time to reach an item. Viewpoint animations are also saved with the viewpoints, as they are simply a list of viewpoints treated as keyframes. In fact, viewpoint animations can be made by simply dragging preset viewpoints onto an empty viewpoint animation.
Command entry: CTRL + F11 Quick Reference You get a different shortcut menu, depending on what element you right-click in the Saved Viewpoints window. All shortcut menus share the Sort option, which sorts the contents of the window alphabetically, including folders and their contents. IMPORTANT Any changes that you make cannot be saved, and will apply for the duration of your Autodesk Navisworks session. Blank Space Save Viewpoint Saves the current viewpoint, and adds it to the Saved Viewpoints window.
Add Copy Creates a copy of the selected viewpoint animation in the Saved Viewpoints window. The copy is named the same as the selected viewpoint animation, but includes the version number in brackets. For example, View1(1), View1(2) and so on. Add Comment Adds a comment regarding the selected viewpoint animation. See “Comments and Redlines” on page 216 for more information on comments. Edit Comment When available, opens the Edit Comment dialog box.
2 Right-click an empty space in the Saved Viewpoints window, and click Save Viewpoint. 3 Type a new name for your viewpoint, and press Enter. Toolbar: Viewpoint ➤ Saved Viewpoints ➤ Save Viewpoint Recall Viewpoints You can return to any of previously saved viewpoints. On recalling viewpoints the navigation mode that was active when the viewpoint was created will be re-selected. Any redlines and comments associated with the viewpoint will also be reinstated.
3 Use the Edit Viewpoint dialog box to adjust the viewpoint’s attributes. 4 Click OK. To delete a viewpoint 1 If the Saved Viewpoints window is not displayed, click Saved Viewpoints on the Workspace toolbar. 2 Right-click the viewpoint you want to remove, and click Delete. Default Viewpoint Options Two view attributes can be saved with a viewpoint: ■ Hide/Required - whether items are hidden or required. ■ Override Materials - the color and transparency of items.
2 In the Options Editor, expand the Interface node, and click the Viewpoint Defaults option. 3 Select the Save Hide/Required Attributes check box if you want to save the hidden and required items with the viewpoints you save. This means that when returning to those viewpoints, the items that were hidden when the viewpoint was saved will be hidden again and those that were drawn will be drawn again.
5 Click OK to return to the Options Editor. 6 Click OK to save the changes. Share Viewpoints You can export saved viewpoints from Autodesk Navisworks into an .xml file, and share them with other users. For more information, see “Export Viewpoints” on page 268 and “Import Viewpoints” on page 261. Sectioning There are two sectioning modes available from the Sectioning toolbar: planes and box.
To open the Sectioning toolbar ➤ Right-click anywhere in the toolbar area of the screen, and click Sectioning on the shortcut menu. Toolbar: Workspace ➤ Sectioning Enable Section Planes To view cross-sectional cuts of your model, you can enable up to six section planes. Only one plane is active at a time, but it is possible to link two section planes together to form slices. The section plane that is active is numbered in the drop-down box on the Sectioning toolbar.
■ Align Front - aligns section plane with front of model. ■ Align Back - aligns section plane with back of model. ■ Align Left ■ Align Right ■ Align To Line - enables you to pick a line, and place the section plane ‘on’ that line, at the point where you clicked, and aligned so that its normal is on the line itself, facing towards the camera.
Autodesk Navisworks updates the position and alignment of the section plane, so that it is placed at the point you clicked. To align a section plane to surface 1 On the Sectioning toolbar, select the plane you want to align in the drop-down box. 2 If it’s not already enabled, click . from the alignment button menu. 3 Select Align To Surface The cursor changes to a crosshair . 4 In the Scene Area, click somewhere on an object you want to align to.
Link Section Planes In Autodesk Navisworks, you can link any two section planes together, so they move as one. Doing this enables you to quickly slice your model in real time. The slices can be used in viewpoints, viewpoint animations, and object animations. In practice, you should only link parallel planes together, such as top and bottom, left and right, front and back.
To enable and use a section box 1 Select the Box mode on the Sectioning toolbar. 2 Click the Enable/Disable 3 Click the Set Box Size button. button. 4 In the Set Box Size dialog box, enter the X, Y, Z values to define the box, and click OK. Autodesk Navisworks creates the sectioning box in the center of the model. 5 Click the Step Size button. 6 In the Sectioning Plane dialog box, select the Enable check box, enter the desired value into the text box below, and click OK.
250 | Chapter 9 Use Viewpoints and Sectioning Modes
Record and Play Animations 10 In Autodesk Navisworks there are two types of animation: viewpoint animation and object animation. Viewpoint Animation Viewpoint animation is a quick and efficient way of recording both your movement through the model and views of the model.
There is also nothing to stop you copying viewpoint animations (hold down the CTRL key when dragging an animation on the Saved Viewpoints window), dragging frames off the animation into a blank space on the Saved Viewpoints window to remove them from the viewpoint animation, editing individual frames attributes, inserting cuts or dragging other viewpoints or viewpoint animations onto the existing one, to continue developing your animations.
5 At this point, you can use the Animation Position slider on the Animation toolbar to move backward and forward through the viewpoint animation to see how it looks. 6 You can edit any of the viewpoints inside the viewpoint animation (see “Edit Viewpoints” on page 241 for details on this), or you can add more viewpoints, delete them, move them around, add cuts, and edit the animation itself until you are happy with the viewpoint animation.
Play Animations You can play back both pre-recorded object animation and viewpoint animation in the Scene Area. The viewpoint animations play in real time; this means that the Autodesk Navisworks engine is still attempting to maintain the guaranteed frame rate so some drop-out may still occur, just as in real-time navigation. To play back an animation 1 If the Saved Viewpoints window is not already displayed, click View ➤ Control Bars ➤ Saved Viewpoints.
Work Within a Team Autodesk Navisworks Review 2010 enables multiple users to participate in a single design review session across a Local Area Network (LAN). This utilizes the shared program features of Windows NetMeeting, available to all Windows users. 11 Collaborate Toolbar The Collaborate toolbar contains the collaboration tools necessary to run collaboration sessions.
NOTE The first time Windows NetMeeting initializes, a Setup wizard will take you through the setup process. You will need to enter your name and email address. When using NetMeeting on a LAN you do not need to log onto a directory server, as these will not be available to you. To place a call, inviting attendees to join 1 Having initialized Windows NetMeeting, click the Call button in the NetMeeting dialog box.
To accept an invitation 1 When you are invited to join a meeting, the Incoming Call dialog box is displayed. 2 Click the Accept button to join the meeting, or Ignore to decline the invitation. NOTE Once you have accepted a call, you will need to click the Collaborate to start your own collaboration session. button on the Collaborate toolbar To become the driver During a collaboration meeting, anyone in the call can take control of the session and become the 'driver'.
258 | Chapter 11 Work Within a Team
Share Data 12 Print You can print a hard copy of the current viewpoint to any printer or plotter. Print Preview Before you print out a copy of the model you are working on, you may wish to see how it will appear. To preview model before printing 1 Click File ➤ Print Preview. 2 Use the Zoom In and Zoom Out buttons to do just that with the preview image. 3 Click Print. 4 In the Print dialog box, click OK. Print Setup This option enables you to the set up paper size and orientation options.
Print Current Viewpoint When the print option is selected, Autodesk Navisworks prints the current viewpoint scaled to fit and centered on the page. NOTE If you would prefer to export an image for printing, see “Export an Image” on page 266 for more information. To print the current viewpoint 1 Click File ➤ Print. 2 Check the printer settings are as required, and click OK. NOTE The maximum image size is 2048x2048 pixels. The Properties button controls printer-specific ink and paper settings.
3 Click Open to import the PDS data. PDS Display Set Files Display sets from Intergraph PDS contain detailed criteria, defining item selections. When imported into Autodesk Navisworks, .dst files create Search Sets in the Selection Sets window. See also: ■ “Selection Sets Window” on page 191 To import PDS display sets 1 Click File ➤ Import ➤ PDS Display Sets. 2 Use the Import dialog box to locate the desired .dst file. 3 Click Open to import the PDS display sets.
3 Click Open. Search Criteria Files Search criteria can be imported into Autodesk Navisworks. This will populate the Find Items window. The search can then be run on the current model, finding any items that match the specific criteria. See “Find Items Window” on page 186 for more information on searching the model for items based on their properties. To import saved search criteria 1 Click File ➤ Import ➤ Search XML. 2 In the Import dialog box, locate the desired search .xml file. 3 Click Open.
the current model accordingly. See “Find Items Window” on page 186 for more information on searching the model for items based on their properties. To import saved search sets 1 Click File ➤ Import ➤ Search Sets XML. 2 In the Import dialog box, locate the desired search sets .xml file. 3 Click Open. Export Files Piranesi EPix Format To export an .
PDS Tag Files To export PDS tags 1 Click File ➤ Export ➤ PDS Tags. 2 In the Export dialog box, enter a new filename and location, if you want to change from those suggested. 3 Click Save. Autodesk DWF Format Autodesk DWF files can be exported from Autodesk Navisworks. The file exporter creates a .dwf file containing: ■ All geometry ■ All materials ■ Per-vertex colors ■ Properties (where available) To export a DWF file 1 Click File ➤ Export ➤ Autodesk DWF.
NOTE When positioning a model relative to sea level, the height of the Google Earth reference points must also be measured relative to sea level. When positioning a model relative to the ground, the Google Earth reference points must be measured relative to the ground. Google Earth always places new placemarks at an altitude of zero, irrespective of whether that is relative or absolute.
These points must be visible in the Scene Area prior to exporting, as once the KML Options dialog box is open you will not be able to navigate before picking. TIP You can use View ➤ Scene View ➤ Split Vertical or Split Horizontal to split the Scene Area into separate views of each reference point. 8 Click OK. 9 In the Export dialog box, enter a new filename and location, if you want to change from those suggested. 10 Click Save. Export Images Export an Image To export an image as a bitmap, .png, or .
4 Click OK. 5 In the Save As dialog box, enter a new filename and location, if you want to change from those suggested. 6 Click Save. Export an Animation To export an animation to an .avi file, or a sequence of image files 1 Click File ➤ Export ➤ Animation. The Animation Export dialog box opens. 2 To export the currently selected viewpoint animation, select Current Animation in the Source box. To export the currently selected object animation, select Current Animator Scene in the Source box.
Viewpoints Files Viewpoints can be exported from Autodesk Navisworks to an .xml file. These viewpoints contain all associated data, including camera positions, sections, hidden items and material overrides, redlines, comments, tags and collision detection settings. Once the viewpoint data is exported to this text-based file format, it can either be imported into other Autodesk Navisworks sessions, or it can be accessed and used in other applications.
TimeLiner Playback TimeLiner playback enables you to play back a TimeLiner construction sequence. In this section, you will learn how to simulate your TimeLiner sequence throughout the duration of the project schedule. 13 Overview of TimeLiner Tool The TimeLiner tool adds 4D schedule simulation to Autodesk Navisworks files. In Autodesk Navisworks Review 2010, TimeLiner has a playback-only option, allowing any externally created project data to be simulated, but no changes to be made to that data.
The Status Icons Each task has its own Status identified by an icon, representing planned against actual relationships. Each icon shows two bars. The top bar represents the Planned dates, and the bottom bar represents the Actual dates. If the Actual Start and Finish dates are the same as the Planned Start and Finish dates, the bars are displayed in green. Any variations between Planned and Actual dates are displayed in red. Missing Planned or Actual dates are shown in grey.
will stop the simulation playing and rewind back to the beginning. Stop will play the simulation from the currently selected time. Play Step Forwards Forward will step forwards a single step size. will fast forward the simulation to the end. You can use the Simulation Position slider to quickly move forwards and backwards through the simulation. Full left is at the beginning and full right is at the end. The Date/Time box below the VCR buttons shows the point in time through the simulation.
272 | Chapter 13 TimeLiner Playback
Autodesk Navisworks Reference 14 File Options Dialog Box Use this dialog box to control the appearance of the model and the speed of navigation around it, and also to create and configure links to external databases. When you modify any of the options in this dialog box, your changes are saved in the currently opened Autodesk Navisworks file, and apply to this file only. Menu: Tools ➤ File Options. Culling Tab Use this tab to adjust geometry culling in the opened Autodesk Navisworks file.
Distance Specifies the farthest distance between the camera and the near clipping plane position in constrained mode. Specifies the exact distance between the camera and the near clipping plane position in fixed mode. NOTE Nothing is drawn between the camera and the near clipping plane; when you override automatic mode, make this value small enough to display your data. Also, overriding automatic mode with values under 1 can produce unpredictable results.
The default setting is 6. You can set the frame rate from 1 through 60 frames per second. Reducing the value reduces drop-out, but can cause jerky movement during navigation. Increasing the value ensures a smoother navigation, but increases drop-out. TIP If you want to restore the default values, click the Defaults button. Head Light Tab Use this tab to change the intensity of the scene's ambient light and headlight for Head Light mode. Ambient Use the slider to control the overall brightness of the scene.
Reflected Transform Select this check box if you use a negative scale for your transform. Rotation Enter the rotation angle. Select the rotation axis by entering values greater than 0. The file geometry rotates about its origin point. Scale Enter the scaling factor around X, Y, and Z axis for the file geometry; 1 being the current size, 0.5 half, 2 being double and so on. To scale proportionally, ensure the X, Y and Z scale values are equal. Entering negative values flips the file geometry inside out.
Vertical Field of View, Horizontal Field of View Defines the area of the scene that can be viewed through the camera. You can adjust the values for both vertical and horizontal angles of view. If the display units are set to degrees, then these numbers should be between 0.1 and 90; and if in radians, between 0.002 and 3.124. A larger value produces a wider angle of view and a smaller value produces a narrower, or more tightly focused, angle of view.
General Node Use the settings in this node to adjust the buffer size, file locations, number of recent file shortcuts you want Autodesk Navisworks to store, and the auto-save options. TIP If you want to restore the default values, click the Defaults button. Undo Page Use the settings on this page to adjust the buffer size. Buffer Size (kB) Specifies the amount of space Autodesk Navisworks allocates for saving undo/redo actions.
Balloon Notifications Page Use the settings on this page to adjust balloon notifications. Enable Balloon Notifications Indicates whether balloon notifications are turned on. Display Duration Sets the length of time (in seconds) the balloon notifications are shown in the Status bar before automatically disappearing. Auto-Save Page Use the setting on this page to adjust the auto-save options. Enable Auto-Save Indicates whether Autodesk Navisworks automatically saves Navisworks files.
Limit (MB) Specifies the maximum memory that Autodesk Navisworks can use. Merge Duplicates These options improve performance by multiply instancing matching items. Rather than storing every item in memory, if any items are the same, Autodesk Navisworks can store one instance of them and 'copy' that instance into other positions. This is of particular benefit on larger models, where there are significant numbers of these duplicate geometries.
NWD Page Use the options on this page to enable and disable geometry compression and select whether the precision of certain options is reduced when saving or publishing NWD files. Geometry Compression Enable Select this check box to enable geometry compression when NWD files are saved. Geometry compression results in less memory being required and therefore smaller NWD files. Reduce Precision Coordinates Select this check box to reduce the precision of coordinates.
See also: ■ “Native File Formats” on page 87 Interface Node Use the settings in this node to customize Autodesk Navisworks interface. TIP If you want to restore the default values, click the Defaults button. Display Units Page Use this page to customize the units used by Autodesk Navisworks. Linear Units Use the drop-down list to select the desired linear value. Meters are used by default. Angular Units Use the drop-down list to select the desired angular value. Degrees are used by default.
Method Specifies how the objects are highlighted. Select one of the following options: ■ Shaded ■ Wireframe ■ Tinted Color Click to specify the highlight color. Tint Level (%) Use the slider to adjust the tint level. Measure Page Use the options on this page to adjust the appearance and style of the measure lines. Line Thickness Specifies the thickness of the measure lines. Color Click to specify the color of the measure lines. In 3D Select this check box to draw the measure lines in 3D.
When you modify default viewpoint settings, your changes do not affect the currently opened Autodesk Navisworks file. They are used as soon as you open a new Autodesk Navisworks file, or start a new Autodesk Navisworks session. Save Hide/Required Attributes Select this check box to save viewpoints with hidden/required markup information about objects in your model. When you use a viewpoint again, the hidden/required markups set when the viewpoint was saved are reapplied.
■ Text - hyperlinks are represented by text boxes with hyperlink descriptions in the Scene View. Visible Select this check box to display this hyperlink category in the Scene View. Tag Icon Type Specifies how to display this hyperlink category. Select one of the following options: ■ Icon - hyperlinks are represented by default icons ■ Text - hyperlinks are represented by text boxes with hyperlink descriptions in the Scene View. and in the Scene View.
Visible Select this check box to display this hyperlink category in the Scene View. Hide Icons without Comments Select this check box to display only the hyperlinks that have attached comments in the Scene View. User-Defined Categories Page Use this page to view custom hyperlink categories. The padlock icon indicates that you cannot add or remove categories directly from here. Buttons Grid View Click to display custom hyperlink categories in a tabular format.
Records View Click to display smart tag definitions as records. Previous and Next Element Use and to navigate between smart tag definitions. If you clicked the Records View button, this is the only way to move between the records. Category Specifies the smart tag category that you want to customize. Property Specifies the property that is displayed in the tooltips for the selected category. Developer Page Use the options on this page to adjust the display of object properties.
Line Size Enter a number from 1 through 9 to set the width (in pixels) of lines drawn in the Scene View. Snap Size Enter a number from 1 through 9 to set the size (in pixels) of snap points drawn in the Scene View. Enable Parametric Primitives Indicates whether Autodesk Navisworks dynamically renders parametric primitives during interactive navigation. Selecting this check box means the level of detail changes during navigation depending on the distance from the camera.
When Dragging on the ViewCube While being dragged, the ViewCube and the scene rotate in an arcball like fashion, unless the Keep Scene Upright check box is selected. Snap to the Closest View Indicates whether the ViewCube snaps to one of the fixed views when it is angularly close to one of the fixed views. When Clicking on the ViewCube Fit-to-View on Change When this check box is selected, clicking the ViewCube rotates around the center of the scene and zooms out to fit the scene into the Scene Area.
Opacity Controls the opacity level of mini wheels. The default value is 50%. You can choose from the following options: ■ 25% (mostly transparent) ■ 50% ■ 75% ■ 90% (mostly opaque) Always Show the Pinned Wheel on Startup When this check box is selected, the ‘pinned’ SteeringWheel and the First Contact dialog box are always shown when Autodesk Navisworks is started. On-Screen Messages Show Tool Messages Toggles the display of tooltips for navigation tools.
3DS Page Use this page to adjust the options for the 3DS file reader. Convert Hidden Select this check box if you want Autodesk Navisworks to convert hidden entities in 3DS files. They are automatically marked as hidden by Autodesk Navisworks. When this check box is clear, the file reader ignores hidden items. Bitmap File Search Paths The paths of texture map files are not stored with the texture maps in the model. Enter the required paths into this box, separating them with semi-columns.
DGN Page Use this page to adjust the options for the 3D DGN and PROP file reader. Faceting Factor Enter the required value to control the level of faceting that takes place. The faceting factor must be greater or equal to 0, where 0 results in the faceting factor being turned off. The default value is 1. To get twice the number of facets, double this value. To get half as many facets, halve this value. Larger faceting factors result in more polygons to a model and larger Autodesk Navisworks files.
PDS information is read from Intergraph's DRV files. The file reader looks for a DRV file with the same base name as the DGN file in the same directory. When this check box is clear, the file reader ignores PDS data. Convert TriCAD Data Select this check box to read object information from Triplan's TriCAD™ while converting DGN files. When this check box is clear, the file reader ignores TriCAD data.
Split by Color Compound objects can be split into parts based on their color. Select this check box if you want to use this functionality. For example, a window object from Architectural Desktop can be split into a frame and a pane. If this check box is clear, you can only select the window object as a whole, whereas if you select this check box, you can select the individual pane and frame. NOTE Autodesk Navisworks names parts of compound objects after their color.
DWG Loader Version Specifies which version of ObjectDBX to use when loading AutoCAD files. This option enables you to select support for the correct version of object enablers that can be used within the file. NOTE When you modify this setting, restart Autodesk Navisworks to apply the changes. This is because once any particular version of ObjectDBX is loaded during reading of a DWG or DXF file, the version in use does not change until the program is restarted.
IFC Page Use this page to adjust the options for the IFC file reader. Convert Bounding Boxes Select this check box to bring through and visualize bounding boxes. When this check box is clear, the file reader ignores bounding boxes. Convert Spaces Select this check box to bring through and visualize spaces. When this check box is clear, the file reader ignores spaces. Faceting Factor Enter the required value to control the level of faceting that takes place.
Inventor Page Use this page to adjust the options for the Inventor file reader. Active Project Specifies the path of the current Inventor project. See also: ■ “Inventor File Reader” on page 100 JTOpen Page Use this page to adjust the options for the JTOpen file reader. Faceting Factor Enter the required value to control the level of faceting that takes place. The faceting factor must be greater or equal to 0, where 0 results in the faceting factor being turned off. The default value is 1.
See also: ■ “Leica Scan File Reader” on page 101 MAN Page Use this page to adjust the options for the MAN file reader. Include Line-Geometry Select this check box to convert MicroGDS line-primitives. When this check box is clear, the file reader ignores line-geometry. Set Facet Circle Specifies the number of facets for arcs. Enter the number of straight line segments required to facet a whole circle. This option corresponds to the MicroGDS Set Facet preference.
Triangulate Point Data Select this check box to extract triangles from the input file. Selecting this check box slows down the speed of file conversion. Apply Scanner Transformation Select this check box to display the image in local coordinates relative to the scanner. Clear this check box to display the image in global coordinates. Use this option when the file contains more than one frame.
RVS Transparencies as Materials Select this check box to attach transparent materials to the objects. Use this option, for example, when large objects in the scene are permanently transparent, and you want to convert them as such. When this check box is clear (the default option), the file reader ignores RVS transparency settings. Use this option, for example, when you want to override transparency settings in the RVS file. NOTE You can also override object transparency directly in Autodesk Navisworks.
STL Page Use this page to adjust the options for the STL file reader. Default Units Specifies the type of units Autodesk Navisworks uses when opening STL files. TIP If the chosen units type turns out to be wrong, you can rescale the model by using the File Units and Transform option. Override Normals Normals control how objects appears when lit. By default, this check box is clear, and the file reader uses the data provided in the STL file, giving the most accurate visible results.
See also: ■ “VRML File Reader” on page 105 Z + F Page Use this page to adjust the options for the Z+F Scan file reader. Sample Rate Specifies the frequency of points extracted from the input file. Increasing the sample rate, reduces the number of points extracted. As a result, the image resolution is reduced, and the file is converted faster. Remove Spurious Points Select this check box to ignore spurious points in the input file. When this check box is clear, the file reader extracts spurious points.
Convert Hidden ADT Spaces Indicates whether space objects that lack any visible 3D geometry in DWG files are converted (for example, objects that lack floor or ceiling thicknesses). Selecting this check box results in corresponding hidden objects appearing in Autodesk Navisworks. NOTE This option does not affect the normal behavior of space objects that have visible 3D geometry in DWG files. Convert Lines Select this check box to convert lines and arcs in DWG and DXF files.
Clear this check box to keep the entities as separate items in the Selection Tree. Merge XRef Layers Select this check box to merge the layers in external reference files with layers in the main DWG file in the Selection Tree. Clear this check box to keep the external reference files separate from the main DWG file in the Selection Tree. Render Type Specifies the render style used for objects when loading DWG files. Selecting Automatic means Autodesk Navisworks uses the render style saved in DWG files.
See also: ■ “Revit File Exporter” on page 111 DGN Page Use this page to adjust the options for the 3D DGN file exporter. Align Global Origins Indicates whether Autodesk Navisworks aligns global origins in referenced DGN files to the origin of the master DGN file. When DGN files are appended together with this check box selected, their global origins are positioned in the same place. Convert Hidden Items Select this check box to convert hidden entities in DGN files.
Shape Merge Threshold Specifies the number of vertices for MicroStation shapes. If the number of vertices is less than or equal to the Shape Merge Threshold value, Autodesk Navisworks merges all shapes on the same level or in the same cell and with the same color into a ‘Shape Set’. Show Hidden Items Select this check box, if you want to display all entities in converted DGN files, irrespective of whether they are hidden or not. NOTE To use this option, you must select the Convert Hidden Items check box.
Select from the following options: ■ Basic - gives you access to the basic Presenter features, with a limited editing functionality. This is the default option. ■ Standard - gives you access to some of the advanced Presenter features. ■ Advanced - gives you access to the advanced Presenter features, such as extra materials, lights, render styles. Smoothed Textures Select this check box if you want textures to look smooth; this takes longer to render.
■ Interactive Shadows - both lights and shadows are shown during navigation. Hardware Bump Maps Select this check box to display bump map textures during navigation. To use this option, enable Hardware Shading first. NOTE This option can only be used on machines with OpenGL 1.5 compliant graphics cards. Hardware Marble Select this check box to display hardware-rendered marble materials during navigation. To use this option, enable Hardware Shading first.
Viewer Radius Specifies the radius of the collision volume. Height Specifies the height of the collision volume. Eye Offset Specifies the distance below the top of the collision volume, where the camera will focus upon if Auto Zoom check box is selected. Third Person Enable Select this check box to use third person view. In third person view, an avatar is shown in the Scene View to represent the viewer.
Auto Zoom Select this check box to automatically switch from third person view to first person view whenever the line of vision becomes obscured by an item. Avatar Specifies the avatar that is used in third person view. Angle Specifies the angle at which the camera looks at the avatar. For example, zero degrees positions the camera directly behind the avatar; 15 degrees makes the camera look down on the avatar at a 15 degree angle. Distance Specifies the distance between the camera and the avatar.
Menu: Tools ➤ Customize Shortcut menu: Customize Buttons Keyboard Opens the Customize Keyboard dialog box and enables you to customize keyboard shortcuts. Toolbars Tab Use this tab to specify which toolbars should appear and which should be hidden, and to add and manage your own toolbars. Toolbars Select the check box to display the corresponding toolbar. Clear the check box to hide the corresponding toolbar. Buttons New Creates a new custom toolbar.
If you want to show only basic and frequently used commands on short versions of the menus, clear this check box. Show Full Menus After a Short Delay Activates when the Always Show Full Menus check box is clear. Select this check box if you want to show all commands on the menu after a brief delay when you rest the mouse pointer on an open menu. Reset Menu and Toolbar Usage Data Resets any changes you’ve made to the appearance of toolbars and menus to default settings.
Title Displays the document title. The title doesn’t have to be the same as the file name. Subject Displays the document subject. Author Displays the author of the document. Publisher Displays the publisher of the document. Published For Displays the party the document is published for. Copyright Displays copyright information. Keywords List of keywords that can be used to search for this document. Comments Displays additional information about the document.
Color Sets the color for a plain background. Top Color Sets the top color in a graduated background. Bottom Color Sets the bottom color in the graduated background. Sky Color Sets the sky color (top) in a horizon background. Horizon Sky Color Sets the sky color (bottom) in a horizon background. Horizon Ground Color Sets the ground color (top) in a horizon background. Ground Color Sets the ground color (bottom) in a horizon background.
■ Current Animator Scene. The currently selected object animation. Renderer Renderer Selects the animation renderer. Choose from: ■ OpenGL. Quickly renders your animation; this option is also ideal for previewing animations. Output Format Select the output format. Choose from: ■ Windows AVI. Exports animation as a commonly readable AVI file. Use the Options button to select the video compressor from the drop-down list, and adjust the output settings.
316 | Chapter 14 Autodesk Navisworks Reference
Glossary Glossary of technical terms relating to Autodesk Navisworks Review 2010. Display Terminology average frame rate This shows the current measured frame rate, averaged over the last second. average frame time This shows the time taken to render the last frame. average triangle rate This shows the rate at which triangles are being rendered and is a measure of how well your graphics card is working. culling Culling is a process for determining items not to draw during the render of a scene.
If these XRefs are not important for the current session, then you can Ignore the reference and the file will load without that XRef inserted. Similarly, Ignore All will load the file without any unresolved XRefs. You can also customize the options for the DWG/DXF/SAT and DGN file readers in the Options Editor (Tools ➤ Global Options ➤ File Readers node) to set whether external references are loaded or not. This gives you more control over file appending into Autodesk Navisworks.
Selection Terminology These are terms specific to Autodesk Navisworks that are used in relation to selecting items. composite objects A composite object is a group of geometry that is considered a single object in the selection tree. For example, a window object might be made up of a frame and a pane. If a composite object, the window object would be both the frame and the pane and be selected all at once.
320 | Glossary
Index 3D space 126 A ADN 13 align viewpoint 126 animation cut 252 cuts 252 edit 251 enable scripts 254 object 251 play 254 record 251 viewpoint 251 Animation Export 314 Animation toolbar 66 annotations 216 append model 120 ARX plugin 106 Auto-Save 53 Autodesk Developer Network 13 B background effects 170 Background Settings 313 backup 53 C CAD preview 108 cameras 151 align 152 orthographic 151 perspective 151 straighten 151 tilt 151 CIP (Customer Involvement Program) close toolbars 61 collaborate drive
edit animations 251 Edit Link 276 Edit menu 58 Edit Viewpoint 276 email 123 enable scripts 254 enhancements 3 exit 53 export animations 266 DWF 264 images 266 KLM 264 PDS tags 264 Piranesi EPix 263 search criteria 268 search sets 268 viewpoints 268 viewpoints report 268 Export Image 314 F file exporters 106 ArchiCAD 115 AutoCAD 106 DGN 114 Max 114 MicroStation 112 Revit 111 Viz 114 file formats NWC 87 NWD 87 NWF 87 supported CAD 90 supported laser scan 91 File menu 57 File Options 78, 273 culling 273 DataT
File 57 Help 61 Review 60 Tools 60 View 59 Viewpoint 59 merge files 122 TimeLiner data 122 Model Views toolbar 65 move objects 205 move toolbars 61 multiple-user installation deployment issues 48 general issues 45 languages 19 licensing issues 49 maintenance issues 50 multiple users 28 networking issues 49 side-by-side 28 stand-alone 17 troubleshooting 45 K keyboard shortcuts 28 73 N L navigation 125 Navigation Mode toolbar 63 navigation modes 127 Examine 131 Fly 131 Look Around 129 Orbit 130 Pan 130
general 277 interface 277 model 277 tools 277 orbit 130 orientation 126 P pan 130 pauses 252 pick radius 182 plain background 170 Presenter materials 177 preview 259 primitives 172 lines 172 points 173 snap points 173 surfaces 172 text 173 print 259 current viewpoint 260 preview 259 setup 259 product news 7 progress bar disk 71 memory 72 pencil 71 web server 71 Project Directory 81 properties custom 196 publish 117 Publish 313 Q Quick Find quit 53 190 R Readme 15 receive files 123 recently used files 81
Selection Tools toolbar 63 Selection Tree 179 sort 179 send 123 share 123 export files 263 import files 260 print 259 viewpoints 244 shortcuts 73 Show Internal Properties 83 side-by-side installation 28 Site Directory 81 smart tags 233 control display 233 definition 233 hide category name 233 snapping 209 SpaceBall 159 stand-alone installation 17 Standard toolbar 62 start 53 status 225 Status bar 71 SteeringWheels 133 stereo 178 straighten 151 Subscription Center 14 SwitchBack AutoCAD 234 MicroStation 234 s
Z 326 | Index zoom 129 zoom area 130
