Installation Manual

Title Installation Specifications and User Manual, Radar
Sensor, C6
Doc. No. E805913
INSTALLATION SPECIFICATION Rev. 003, Page 2 of 12
1.0 PURPOSE/SCOPE
This document describes the specifications for installation of type C6 Radar Sensors.
2.0 MATERIALS/EQUIPMENT
N/A
3.0 APPLICABLE DOCUMENTS
Outline see Fig 1.
DIN 40050-9 IP6K9K
IEC 68-2-6 Fc IEC 68-2-7 IEC68-2-10 IEC68-2-11 Ka
IEC 668-2-14Nb IEC 68-2-27 IEC 68-2-29 IEC68-2-30
IEC68-2-32 IEC68-2-38 IEC68-2-50 IEC68-2-51
IEC68-2-52 IEC68-2-56 IEC68-2-64Fh IEC529, 13.4
SAE J1211 SAE J1812 SAE J1879
4.0 DEFINITIONS
N/A
5.0 SPECIFICATIONS
5.1. Preface
This chapter describes the specifications to install C6 radar sensors into vehicles.
These specifications shall be complied with to enable the specified characteristics of the
sensors as well as the complete system. Due to the various installation situations and
applications, a measurement check is required to verify the actual installation
implementation.
5.2. C6 Sensors
This chapter describes the characteristics relevant to the installation of C6 sensors in
vehicles. Note that there are three types of C6 sensors, each supporting various
applications as follows:
C6 Mid Range Radar (24 GHz MRR)
Model # 6208428
– used for medium range applications such as Forward collision Warning.
C6 Short Range Radar (24 GHz SRR)
Model # 6221569
– used for short range applications such as ACC Stop and Go, Blind Spot Monitoring.
C6 Multi Mode sensor (24 GHz MMR)
Model # 6234448
– combined SRR and MRR functionality.
Unless otherwise stated the specifications contained in this document apply to all C6
sensor types.