Operation Manual

Context menu 3
If a road section is selected on the map, the "Block section"
option will ban traffic along that route, and that section will be
avoided when the route is mapped. If the section was already
blocked, it can be unblocked.
Similarly to the section blocking procedure, select the "Block
area" option from the context menu. The system will go into
map display mode. By marking a rectangular area on the map,
the user chooses the blocked area where all sections will be
blocked (in line with the principle of blocking sections from
junction to junction). A blocked area may be unblocked by
choosing the "Unblock area" option from the context menu.
For more information, refer to the "Road blocks" chapter.
Context menu 4
If a favourite point or a POI defined by the user is selected, the
point can be moved on the map, deleted or copied with the use
of "Copy/Cut/Delete/Paste" options.
2.7 Options menu
The menu is available from the main menu. It features the following items:
Profiles: opens the profile manager menu. Profiles enable
the user to save device settings. The profile manager helps
the user to quickly switch between the saved setting groups.
Night mode: select this mode to change the colours of the
map to colours more suitable to night-time navigation that do
not wear out the eyes and do not dazzle when the car interior
is dark. By default, the night mode is activated automatically
with enabled GPS navigation, in accordance with the time,
time of the year and position on the map.
On-board computer: opens the on-board computer panel
on the screen, presenting information on speed, distance
covered, length of stops and drive, etc. For more information,
refer to section "Showing position".
Rotate screen: enables the screen to pivot from vertical
orientation to horizontal. Option available only on devices
with Windows Mobile 2003SE and Windows Mobile 5
operating systems. This function can be assigned to hardware
button (refer to "Hardware Buttons") and can be used instead of system functions.
Pilot: enables and disables the pilot panel (turn and route information) during the navigation. By default, it is enabled
automatically when the navigation mode is on, and is disabled in the same way after completing the navigation. Refer to
section "Navigation".
Sounds: enables and disables all the sounds generated by AutoMapa, including tapping sounds, navigational messages,
etc. Always on upon application start. For message settings, refer to section "Settings".