Specifications

CNC-210A Series Technical Manual
16
έᚊ࿪ཝҋજ̼ѣࢨ̳Φ
TAILY AUTOMATION CO.,LTD.
9. SPECIFICATIONS
Model CNC-210AS CNC-210AE
Control system Single chip microprocessor
Keyboard 33 keys key pad
Display 13 digits 7-segment display, 27 LED lamps.
Memory
FLASH ROM
，
Capable storing up to 1000 steps
Communication RS-485 interface
SHIFT 0.01~999.99mm
WIDTH 0.01~999.99mm
PITCH 0.001~9.999mm
TURNS 0.1~9999.9turns/1~99999turns
S.SLOW 0.1~999.9turns
E.SLOW 0.1~999.9turns
H.S. 1~99%
L.S. 1~99%
FUN Special occasions
Winding
Parameter
Options FEED DIR, WIND DIR, EDGE STOP, AUTO HOME, AUTO START
HI/LOW lever or V-out (DC 0~10V) speed
signal output
Control
signal
Driver 0.5HP DC motor in directly
CW/CCW control signal output
Counting A, B, C, 3 phase, with Absolute/Relative counting
Winding
spindle
shaft
Brake DC24V/12W brake control output
Output
Drive two phases 2ASTEP motor in
directly.
Drive two phases 2A STEP motor in directly or
PUS, DIR control signal output for external
connect STEP motor driver.
Guiding
traverse
Unit Moving increment 0.01/0.02/0.04mm selection
Input function
RESET
、
STOP
、
START
Output signal
RESET
、
STOP
、
START lamp control(DC24V 0.1A)
Auxiliary I/O 4 input (DC24V) and 4 output (DC24V 0.1A)
AC Power
AC 110V
、
220V
、
240V 600VA(MAX)
Ambient temperature
10
℃
~40
℃
Dimension 270(W)×248(D)×113(H)
Net weight 3.0KG