Specifications

CNC-210A Series Technical Manual
2
έᚊ࿪ཝҋજ̼ѣࢨ̳Φ
TAILY AUTOMATION CO.,LTD.
1. INTRODUCTION
CNC-210A is a series of COIL WINDING MACHINE CONTROLLER developed by
TAILY
AUTOMATION
. It not only retains all the features of previous designs, it also has a low noise
level and is less sensitive to external power fluctuation. Furthermore, it also includes a RS-485
network interface, making coil-winding operation easier to manage.
CNC-210A also features an integrated design: putting stepper motor driver, DC motor speed
controller, brake and power supplier control circuits into one control box, simultaneously
achieving size reduction, high performance and low cost.
CNC-210A Series offers CNC-210AS “Standard Model” and CNC-210AE "External Connection
Model”, depending on whether a close-loop driver is provided for various applications.
MODEL Winding Spindle Guiding Traverse
CNC-210AS
Drive 0.5hp DC motor in
directly.
Drive two phases 2A STEP motor in directly.
CNC-210AE
External connect winding
spindles motor driver.
Drive two phases 2A stepper motor in directly,
Or external connect guiding traverse STEP motor
driver.
2. MAIN FEATURES

Single chip Microprocessor design, has further higher performance and higher functions; it
also has less sensitive to external power fluctuation or to external electromagnetic
interference.

Memory use FLASH ROM, capacity capable storing up to 1000 steps winding data, 9 winding
parameters, and 5 options can be independently assigned for each step. Off-power memory
retention without battery.

Winding speed can be specified using the front panel keypad, resulting in easy programming
of multi-step, multi-speed settings.

Guiding traverse shaft stepper motor with a constant-current driver offering fast wire guiding
speeds.

Guiding traverse shaft offering 10 steps moving speed selection.

Offering RS-485 interface for PC linking and data transfer.

Software can be update through the personal computer.

Power input AC100V~120V
、
220V~240V 600VA(max).