User`s manual

CD Automation srl REVO S User’s Manual
CD-Eng-REVO-S-1PH-60-210A-Solid-State-Relay
9
4 Technical Specifications
4.1 General features:
Cover and Socket material: PolymericV2
Utilization Category AC-51 AC-55b
IP Code 20
Method of Connecting Single Phase Load
Auxiliary voltage: 12÷24V dc/ac (max 70mA)If requested
Relay output for Heater Break Alarm
(only with HB option):
0.5A a 125VAC
4.2 Input features:
Logic input SSR: 5 ÷ 30Vdc 9mA Max (ON ≥ 5Vdc OFF < 4Vdc)
Logic input SSR with HB option: 4 ÷ 30Vdc 5mA Max (ON ≥ 4Vdc OFF < 1Vdc)
Analog Input V: 0 ÷ 10Vdc (15KΩ)
Analog Input A: 4 ÷ 20mA (100Ω)
Digital Input calib. (only with HB option): 12 ÷ 24V dc/ac (max 4mA)
4.3 Output features(power device):
Current
Nominal
Voltage
range
(Ue)
Repetitive
peak reverse
voltage
(Uimp)
Latching
current
Max peak
one cycle
Leakage
current
I
2
T value
max
Frequency
range
Power loss
Isolation
Voltage
(Ui)
(A) (V) (480V) (600V) (mAeff)
(10msec.)
(A)
(mAeff)
tp=10mse
c
(Hz)
I=Inom
(W)
Vac
60 24÷600 1200 1600 450 1000 15 4750 47÷70 65 2500
90 24÷600 1200 1600 450 2000 15 19100 47÷70 84 2500
120 24÷600 1200 1600 450 1540 15 11300 47÷70 138 2500
150 24÷600 1200 1600 450 2000 15 19100 47÷70 162 2500
180 24÷600 1200 1600 300 4800 15 108000 47÷70 178 2500
210 24÷600 1200 1600 300 5250 15 128000 47÷70 202 2500
4.4 Fan Specification (only from 120 to 210A)
Supply: 230V Standard Input Power 16W (1 Fan)
Supply: 115V Option Input Power 14W (1 Fan)