Installation guide

© 1999 Directed Electronics, Inc. Vista, CA 19
When programmed for single button arm/disarm configuration, the transmitter buttons are assigned as follows:
. . . . . . . . . operates . . . . . . . . . . Lock/Arm, Unlock/Disarm, and Panic
. . . . . . . . . operates . . . . . . . . . . Channel 2
. . . . . . . . . operates . . . . . . . . . . Channel 3
two vehicle operation with single transmitter
You can get two-vehicle operation with the transmitters that come with this system.
Using the 476A transmitters, all auxiliary channels are available on both vehicles. Before programming, make a
list of all channels on each vehicle, and decide which button(s) should control which channel.
For example, if you wanted the top two buttons to control Vehicle One and the bottom two buttons to control
Vehicle Two, here is how each system would be programmed:
V
ehicle One
. . . . . . . . . operates . . . . . . . . . . Lock/Arm, Unlock/Disarm, Panic
. . . . . . . . . operate . . . . . . . . . . Channel Two
and operate . . . . . . . . . . Channel Three
V
ehicle Two
. . . . . . . . . operates . . . . . . . . . . Lock/Arm, Unlock/Disarm, Panic
. . . . . . . . . operates . . . . . . . . . . Channel Two
and operate . . . . . . . . . . Channel Three
single button arm/disarm configuration