Specifications

4114V104-UK 3

SYMBOL IDENTIFICATION

Triangle with an exclamation mark: Warning / demand.

Potentially lethal situations.

The CE mark proves the compliance of the device with the essential

requirements of the directives.

The double insulation symbol shows that the device is protected by

double or reinforced insulation.

SAFETY INSTRUCTIONS

DEFINITIONS

Hazardous voltages have been defined as the ranges: 75 to 1500 Volt DC, and

50 to 1000 Volt AC.

Technicians are qualified persons educated or trained to mount, operate, and

also troubleshoot technically correct and in accordance with safety regulations.

Operators, being familiar with the contents of this manual, adjust and operate

the knobs or potentiometers during normal operation.

RECEIPT AND UNPACKING

Unpack the module without damaging it. The packing should always follow the

module until this has been permanently mounted.

Check at the receipt of the module whether the type corresponds to the one

ordered.

ENVIRONMENT

Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,

as well as rain and heavy moisture. If necessary, heating in excess of the stated

limits for ambient temperatures should be avoided by way of ventilation.

All devices fall under Installation Category II, Pollution Degree 1, and Insulation

Class II.

MOUNTING

Only technicians who are familiar with the technical terms, warnings, and

instruc tions in the manual and who are able to follow these should connect the

device.

Should there be any doubt as to the correct handling of the device, please

contact your local distributor or, alternatively,

PR electronics A/S