Instruction manual

SM425 INSTRUCTION MANUAL 2.0 SPECIFICATIONS

12 42500001 REV A

2.3 High-Temperature Separate-type Detector and Related

Equipment

2.3.1 SM425P (0.15m) High-Temperature Separate-type Detector

Standard Specifications

Construction:

Water-resistant, non-explosion proof

Probe length:

0.15 m

Terminal box:

Aluminum alloy

Probe material:

Probe material in contact with gas: SUS 316 (JIS) (Probe), SUS 304 (JIS) (Flange), Zirconia

(Sensor), Hastelloy B, (Inconel 600, 601)

Weight:

Approx. 3 kg

Installation:

Flange mounting (The use of high-temperature detector probe adapter ZO21P-H is necessary.)

Flange standard:

JIS 5 K 32 FF equivalent (thickness varies)

Mounting angle:

Any angle between the horizontal and vertical (high-temperature probe is fitted with an adapter)

Reference gas and calibration gas piping connection: Rc 1/4 or 1/4 NPT female

Cable inlet:

G 1/2, Pg 13.5, M20 3 15, 1/2 NPT

Ambient temperature:

-20 to 150°C

Sample gas temperature:

0 to 700°C (temperature at the measuring point of the sampling gas), 0 to 750°C, or 0 to 1400°C

when the probe adapter for high temperature is used.

Temperature of the probe adapter shall not exceed 300°C to protect the gasket and avoid the

bolts seizing together.

Sample gas pressure:

- 0.5 to + 5 kPa: when used at the range of more than 0 to 25 vol% O

, - 0.5 to + 0.5 kPa. (An

auxiliary ejector is required for negative pressure application.)

Model and Code

Refer to “Model and Code” in