Instruction manual

4 or 5 fault tones play to alert of the report.

Trunk Release

Press and hold AUX

The Trunk opens (if connected) when this button is pressed for 2 sec-

onds. The Aux LED and tones play to conﬁrm.

Remote Start

Press and release

Activates (or if On, deactivates) the remote starter. The engine and

parking lights turn On and the Remote start LED and On tones play,

or the engine and parking lights turn Off and the Remote start LED and

Off tones play to conﬁrm. If a Remote start conﬁguration issue prevents

the engine from starting, a fault tone will play while the parking lights

ﬂash a Remote Start fault report*** to identify the fault.

Key Takeover

When you are ready to drive

The system keeps the engine running until the vehicle is ready to

be driven. To perform Key Takeover:

1. Disarm the system and enter the vehicle, do not step on the

foot brake.

2. Insert the key, turn it to the run position, and then step on the

foot brake, the remote start then turns off.

3. The parking lights turn off to indicate remote start is off.

4. The vehicle is ready to drive.

Note: Some Push-to-start vehicles do not offer the key takeover