Instruction manual
14
© 2012 Directed. All rights reserved.
Alarm Features
Normal Arm Protection
Status LED: The Control Center Status LED flashes as a visual indicator 
that your vehicle’s security system is active.
Starter Kill: The Failsafe starter kill relay prevents the engine from 
starting 
Note
May require additional parts and installation
Sensor triggers: The shock sensor can distinguish minor impacts from 
major impacts to the vehicle exterior. Minor impacts causes the system 
to emit a Warn-away output by chirping the siren and flashing the 
parking lights for 3 seconds. Major impacts caused for example by a 
forcible entry attempt, results in a Full Trigger output. The siren sounds 
and the parking lights flash for 30 seconds or longer. Both Warn-
away and Full Triggers send a message to the remote control. 
Point of entry triggers: Opening the hood or trunk causes a Full Trig-
ger output, while opening a Door or turning on the Ignition causes the  
the siren to chirp 3 seconds before beginning the Full Trigger output. 
This 3 second delay allows time to disarm and silence the siren in 
case of accidental trigger. The Full Trigger message is still sent to the 
remote.
Sensor Warn-away 
When the system sensors detect a Warn-away trigger the siren chirps 
and parking lights flash for 3 seconds. No messages are sent to the 
Responder LE remote control for Warn-away triggers.










