Installation manual

Publication 1394-IN002B-EN-P — February 2004
Specifications and Dimensions A-9
AC Line Filter Specifications
The following AC line filters are compatible with the 1394 drive
family.
External Shunt Module/Resistor Specifications
The passive external shunt resistor kit (1394-SR10A) is available for 5
and 10 kW systems with regenerative loads that exceed the capacity of
the internal 200W shunt resistor provided. Most 5 and 10 kW systems
will not require an external shunt resistor kit.
All 22 kW 1394 system modules require an external shunt module
(1394-SR9Ax or 1394-SR36Ax). Shunt modules with (rms) power
output of 300, 900, 1800 and 3600W continuous, 160,000W peak are
available for use with the smart power 22 kW system module. You
must use one shunt module with each 22 kW smart power system
module. Available in two sizes, each package contains an integral fuse
and terminal block. The 3600W package is available with a 115/230V
ac cooling fan. Choose your shunt module based on the shunt
requirements from analysis using Motion Book v4.0 (or later).
1
Bussmann part number.
Note: CE marked and UL Listed to U.S. and Canadian safety standards.
1394 System
Modules
AC Line Filter
Catalog Number
Specifications
Voltage Phase Current
Power
Loss
Weight Humidity Vibration
Operating
Temperature
1394x-SJT05-x SP-74102-006-01
460V ac
50/60 Hz
Three
23A @ 50° C
(122° F)
20W
1.6 kg
(4.16 lb)
90% RH
10-200 Hz
@ 1.8 g
-25 to 85° C
(-13 to 185° F)
1394x-SJT10-x SP-74102-006-02
30A @ 50° C
(122° F)
38W
2.7 kg
(7.02 lb)
1394x-SJT22-x SP-74102-006-03
75A @ 50° C
(122° F)
57W
5.2 kg
(13.52 lb)
1394 System
Modules
Shunt Module
Catalog Number
Specifications
Fuse Replacement
Drive
Voltage
VAC
Resistance
Ohms
Peak
Power
kW
Peak
Current
Amps
Continuous
Power
Watts
Weight
kg (lbs)
1394x-SJT05-x and
-SJT10-x
1394-SR10A
460
16 40 40 1400 4.99 (11.0) 1394-SR10A-FUSE-A
1394x-SJT22-x
1394-SR9A
4 160 200
300 3.63 (8.0)
FWP-50A14F
1
1394-SR9AF 900 3.63 (8.0)
1394-SR36A 1800 8.6 (19.0)
1394-SR36AF
3600
(fan cooled)
9.0 (20.0)