Instruction manual

If the system is triggered and the siren has been sounding for less than

six seconds, pressing

disarms the system. The six second timer is

provided for your convenience, in case the system is accidentally trig-

gered.

System Override

If your remote control is lost or damaged, you can manually disarm your

vehicle security system or disable an optional starter kill. To disarm or

disable the system without a remote control, you must have the vehicle’s

ignition key.

To disarm/disable the system:

1. Turn the ignition to the ON position.

2. Press the control center button the preset number of times (one to

ﬁve times) within 15 seconds. The factory default setting is 1 press.

After ﬁve seconds, the sys tem will disarm/disable. If the system

does not disarm/disable, you may have waited too long. Start

over by turning the ignition off and on.

Number of Presses_____________________________________

Important:

The control center button can be programmed to

respond to 1-5 presses for the disarm/disable function. You

must check with the installer to verify the programming for your

individual unit.

Valet mode

You can prevent your system from automatically arming/locking and

trig ger ing by using Valet Mode. This is very useful when washing the