Instruction manual

Short run/turbo mode

Short run turbo mode keeps the engine running after arriving at your

destination for a programmable period of 1, 3, 5 or 10 minutes. This

allows the system’s timer to conveniently cool down the turbo after you

have left the vehicle.

To activate:

1. Park the vehicle and set the parking brake.

2. Remove your foot from the brake pedal and leave the engine

running.

3. Press and release the

and buttons at the same time. The

lights will ﬂash to indicate the remote start has entered short run

turbo mode.

4. Turn off the key, the engine will keep running.

5. Exit and secure the vehicle. The engine will turn off after the pro-

grammed run time.

Temperature Start Mode

Pressing the , and simultaneously activates the Tempera-

ture Start mode. The parking lights ﬂash fast four times to conﬁrm activa-

tion. The engine does not start once activated, it starts when the vehicle

interior temperature drops below 0°F.

Deactivate Temperature Start mode by pressing the same buttons again

or turning the vehicle ignition on. The parking lights ﬂash slowly four

times to conﬁrm deactivation

Valet take-over

The Valet Take-Over feature allows the vehicle to remain running after

the key has been removed from the ignition. This feature is useful for

occasions when you wish to exit and lock the vehicle for short periods

of time, but would like to leave the motor running and the climate