Instruction manual

your installer is programming the security system with the Directed

Bitwriter, ignition lock and unlock are independent features that

can be programmed separately.

Important: The vehicle doors must be closed for the ignition lock

feature to work.

• Passive door locking (with passive arming) or Active door locking

(only when arming with the transmitter). Passive locking allows the

vehicle’s doors to lock when the security system passively arms

(after the 30-second countdown). This feature only works if passive

arming has been programmed.

• Panic mode Enabled/Disabled when the ignition is turned on.

(Some states have laws against sirens sounding in moving cars.)

• Forced passive arming On or Off. If your security system is pro-

grammed for passive arming and the forced passive arming fea-

ture has been programmed on, the system will passively arm after

one hour, even if a protected entry has been left open. Forced

passive arming ensures that the system will be armed if a door has

accidentally been left ajar when leaving the vehicle.

When the system passively arms after one hour, the entry point that

has been left open, and anything connected to the same zone, is

bypassed and cannot trigger the system. However, the remaining

inputs to the system are fully operational.

• Full trigger response 30 or 60 seconds: This determines how long

the full triggered sequence lasts. Some states have laws regulating

how long a security system can sound before it is considered a