Operating instructions

6 - OPERATING INSTRUCTIONS

6.1 - STANDARD CONTROL PANEL

IMPORTANT!

Before connecting the control panel to the mains,

check that all the switches are in the ‘0’ position

and that the safety thermostat is “on”.

Boiler start-up

Using this switch you can connect or disconnect the boiler from

the mains electricity supply .

- With the switch in the ‘0’ position the boiler is not

switched on (green led light off)

- With the switch in the ‘I’ position the boiler is connected

to the mains electricity supply (green led light illuminated) and

is ready to operate.

The recycle pump functions.

Mode selection keys

With the switch nr. 13 you can connect or disconnect the sy-

stem pump/boiler load from the mains electrical system.

- With the switch in the ‘0’ position the system pump is

not switched on.

- With the switch in the ‘II’ position the system pump is

connected to the mains electricity supply.

32. Working thermostat

41. Main fuse (4A)

42. Boiler thermometer

11. Mains switch

12. Fan switch

13. System pump switch

31. Safety thermostat

Gasogen