Operating instructions

Back-up boiler start-up (gas/oil firing mode)

Using this switch you can connect or disconnect the back-up

boiler linked to the GASOGEN G3 2S from the control panel .

- With the switch in the ‘0’ position the back-up boiler is

not switched on (green led light off)

- With the switch in the ‘I’ position the back-up boiler is

connected to the mains electricity supply (green led light illu-

minated) and is ready to fire (wood or gas/oil – refer to fol-

lowing points.

The recycle pump functions.

Mode selection keys (gas-oil firing mode)

With the switch nr. 13 you can connect or disconnect the sy-

stem pump/boiler load from the mains electrical system.

- With the switch in the ‘0’ position the system pump is

not switched on.

- With the switch in the ‘II’ position the system pump is

connected to the mains electricity supply.

Note:

The upper loading door must be closed.

With the switch 22 it is possible to select the operation mode

(wood or the back-up gas or oil fired boiler).

- Place the switch into the ‘I’ position (gas/oil firing mode)

With the switch nr. 23 you can connect or disconnect the bur-

ner (gas or oil) from the mains electrical system.

- With the switch in the ‘0’ position the burner is not fired.

- With the switch in the ‘II’ position the burner is connected

to the mains electricity supply.

The recycle pump is not running.

22 23