Instruction Manual

16
ATS-3AM & ATS-2AM Dominator Tempo & Syncro Instruction Manual
6.6 Coding Premium Remote Controls
Fig.6.6.1
6.6.1 Setting Remote Control Functions
The opener can only operated from 4-button Premium Remote
Control that have been programmed into its memory. Up to 64
codes can be stored in the memory.
a. Press the MODE button repetitively until the TRANSMIT
LED is lit.
b. Press and HOLD the button/s indicated in the Fig 6.6.1 to set
the required remote control function. The Main light will start
to flash rapidly.
c. Press one of the four (4) buttons on the Premium Remote
Control
3A
(Fig 6.6.2) until the main light starts to flash
rapidly, then release Premium Remote Control button.
d. Press the Premium Remote Control button again until the
main light stops flashing rapidly.
e. Release both buttons. The Premium Remote Control button is
now coded, press to test.
NOTE: Refer to the Light indicator table for the details of the
Premium Remote Control status.
BUTTON
REMOTE CONTROL
FUNCTION
Open / Stop / Close HOLD
PET (Pedestrian) Mode HOLD
Open HOLD
Light HOLD HOLD
Vacation Mode HOLD HOLD
MAIN LIGHT REMOTE CONTROL
STATUS
ON Button added
OFF Button removed
2 FLASHES, then OFF Remote control deleted
4 FLASHES, then OFF Memory full
Fig.6.6.2
Button 1
Button 2
Button 3
Button 4
WARNING! The manufacturer is not responsible for
any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications
could void the user’s authority to operate the
equipment.
AVERTISSEMENT! Le fabricant n’est pas responsable
des éventuelles interférences avec la réception de
la radio ou de la TV due à une modification de cet
équipement effectuée sans autorisation. De telles
modifications peuvent invalider le droit à utiliser
l’équipement.
Refer to Appendix F to set the PET position
before coding PET Mode.
tip