Installation manual

Owner Installation Instructions GDO-11v1 Ero

Coding Transmitters

Step 18.4 - Code a Transmitter Button for Pet

(Pedestrian) Mode

Brieﬂ y press the DOOR CODE button three times,

then press it again and hold (will beep four times on

fourth press (Fig. 41)).

Press one of the four buttons on the transmitter for

two (2) seconds, pause for two (2) seconds, then

press the same button again for two (2) seconds.

Release the DOOR CODE button.

Press the transmitter button to test.

To change the default pet (pedestrian) door opening

position, refer Step 25.

Step 18.5 - Coding a Transmitter Button to

the Courtesy Light

The transmitter can be programmed to operate the

courtesy light on the opener independently of the door

moving.

Brieﬂ y press the DOOR CODE button four times,

then press it again and hold (will beep ﬁ ve times on

ﬁ fth press (Fig. 42)).

Press one of the four buttons on the transmitter for

two (2) seconds, pause for two (2) seconds, then

press the same button again for two (2) seconds.

Release the DOOR CODE button.

Press the transmitter button to test the courtesy

light.

ﬁ g