Installation manual

Owner Installation Instructions GDO-9 29
Default Settings & Specifi cations
Factory default settings
Default Step Maximum
Courtesy light time 3 Mins. 4 Mins.
Obstruction force margin 2 1 12
Auto close time 0 Secs 1 Sec. 255 Secs.
Technical specifi cations
Dynamo™ Enduro™
Power supply 230V - 240V AC 50Hz 230V - 240V AC 50Hz
Transformer rating 24V DC 24V DC
Standby power 2.2 Watts 2.2 Watts
Motor power 100 Watts 100 Watts
Motor type 24V DC permanent magnet 24V DC permanent magnet
Shuttle travel distance in the C-Rail 2.8m approx (standard) 2.8m approx (standard)
Maximum shuttle travel distance in the C-Rail 5m (with extended C-Rail) 5m (with extended C-Rail)
Maximum door opening: Width x Height
Weight:
16.5m
2
100 kg
18m
2
100 kg
Minimum Clearance
(Bottom of C-Rail to highest point of door travel)
25mm 25mm
Short term peak force 800N (80kg) 1000N (100 kg)
Lift force 500N (50kg) 500N (50kg)
Nominal force 150N (15kg) 150N (15kg)
Receiver code storage capacity 14 x 4 button transmitter
codes
14 x 4 button transmitter
codes
Transmitter frequency 433.47, 433.92, 434.37MHz 433.47, 433.92, 434.37MHz
Coding type Multi-frequency Code
hopping
Multi-frequency Code
hopping
Number of code combinations Over 4.29 billion random
codes
Over 4.29 billion random
codes
Code generation Non-linear encryption
algorithm
Non-linear encryption
algorithm
Transmitter battery CR 2032, 3 Volts CR 2032, 3 Volts
Courtesy light Festoon style 24 volts 15
watts lamp
24 volts LED Module
Controller fuse 10A slow blow 10A slow blow