Instruction manual

3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection. Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Read these operating instructions well before
you use the tool
Do not throw the electronic waste products into
the domestic waste refuse. Such products must be
delivered to a recycling centre.
Specifications
Model WTLD018
Nominal battery voltage: 20V
Charger
230-240Vac 50 Hz 17W
Output: 23Vdc 400mA
Charging time: 3-5 Hours
Drill no load speed: 0-400/0-1300 rpm
Torque settings: 24 plus drill
Drill chuck capacity: 10mm Keyless
Weight (Including battery): 1.42 kg
Weight (excluding battery): 1.04 kg
Drilling capacity:
Steel 10mm
Timber 20mm
Introduction
Your new AUTOMATIC power tool will more than satisfy
your expectations. It has been manufactured under
stringent AUTOMATIC Quality Standards to meet
superior performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new AUTOMATIC Power Tool.
Take special care to heed the Cautions and Warnings.
Your AUTOMATIC power tool has many features that
will make your job faster and easier. Safety, performance,
and dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.