Instruction manual

ManualsBrandsAutomation Correct ManualsConsumer electronicsCoal-trol Digital TS2

Coal-trol Digital™ - Model TS2 V3

Automation Correct LLC

5/2010 R0

www.automationcorrect.com

Page 1

Instruction Manual

To a new era in solid fuel heating. You have chosen to improve your

household comfort and increase the efﬁciency of your heating dollars.

The Coal-trol Digital™ system has been speciﬁcally developed to improve

the performance and convenience of your anthracite coal stove. A new type

of digital thermostat and solid-state control module make this possible.

An investment of a small amount of time to review this manual will ensure

proper performance of your Coal-Trol Digital™ system.

This manual contains operating instructions for the Coal-trol Digital™

Model TS2 Thermostat when used with a model CM2 Control Module. This

equipment has been factory supplied by your stove manufacturer.

Introduction

Table of Contents

Welcome –

Coal-trol Digital Feature Overview 2

Safety Information 3

For Service and Repair 4

Coal-trol Digital Limited Warranty 4

Locating the Thermostat 5

Connecting Control Module and Thermostat 5

Power ON/OFF Switch 5

Operating Controls of the Thermostat 6

Quick Usage Guide 7

Power-up Sequence 8

MENU Button Operation 8

Round-robin Temperature/Time Display 9

Override Temperature Setting (Setback Override) 9

Fan Speed Control 9

Firing Rate Indicator 9

Day & Night Temperature Setting (Setbacks) 10

SETUP Menu Operation 11

MIN/MAX Adjustment and Factory Settings 12

EXTENDED Menu Operation 13

Overtemperature and Maintenance 14

Speciﬁcations 15

Coal-trol Digital™, Pelli-stat™ by Automation Correct LLC

All others trademarks by the respective owners.

Page

SYRACUSE • NY

Summary of content (16 pages)

PAGE 1
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 1 Welcome – To a new era in solid fuel heating. You have chosen to improve your household comfort and increase the efficiency of your heating dollars. The Coal-trol Digital™ system has been specifically developed to improve the performance and convenience of your anthracite coal stove. A new type of digital thermostat and solid-state control module make this possible.
PAGE 2
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 2 Coal-trol Digital Feature Overview The Coal-trol Digital is a complete control system designed for automatically fed stoker stoves and furnaces utilizing anthracite fuel. The stove-mounted Control Module and the wall-mounted Coal-trol Thermostat work together to supervise all stove operations and typically maintain room temperature to within ±1°F of the desired setting.
PAGE 3
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 3 Safety Information Read and pay careful attention before proceeding! ATTENTION - Please follow all manufacturers instructions that came with your stove or furnace. The Coal-Trol Digital is designed to complement and enhance the safe operation of your appliance.
PAGE 4
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 4 For Service or Repair Contact your dealer, or our company. Phone: (315) 299-3589 Email: coaltrol@automationcorrect.com Web: www.coaltroldigital.com Coal-trol Digital™ Limited Warranty THREE-YEAR WARRANTY - Automation Correct LLC (us) warrants TS2 Thermostat and Control Module to be free from defects in material and workmanship.
PAGE 5
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 5 Locating the Thermostat The room temperature sensor is located in the Thermostat. For proper operation, the sensor must be exposed to the heat produced by the stove. The preferred mounting locations include: An inside wall, away from the direct air stream of the convection blower, and away from radiant heat produced by the stove.
PAGE 6
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Operating Controls of the Thermostat Page 6 Purpose of the Buttons and Lights Coal-trol Digital™ Model TS2 Thermostat MENU button - Each press will display next OPERATION menu setting. Pressing and holding will enable access to SETUP and EXTENDED menu options. DOWN button - Each press will decrease a setting. Press and hold to decrease fast. Also used to enable a selected setting. UP button - Each press will increase a setting.
PAGE 7
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 7 "Everything is installed and setup. Tell me how to work the thing!" Quick Usage Guide Round-robin Display Current Temperature Temperature Setting 72F "F" for Fahrenheit "C" for Celsius D 73F Current Time 1126A "D" for Daytime Temperature setting. "N' for Nighttime Temperature setting. "O" for Override Temperature setting. In regular operation the display shows the current temperature, the temperature setting and current time.
PAGE 8
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 8 Power-up Sequence Upon first power to the thermostat, the display will momentarily show the firmware version number, the thermostat type, and a manufacture type. The thermostat will then enter and wait for the time of day clock to be set, with the status light blinking.
PAGE 9
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 9 Round Robin Temperature/Time Display While in regular operation, the thermostat cycles between the Current Temperature, the Temperature Setting, and the Current Time. NOTE DISPLAY Current Temperature 72F "F" for Fahrenheit "C" for Celsius Temperature Setting Current Time D 73F 1126A "D" for Daytime Temperature setting. "N' for Nighttime Temperature setting. "H" for Hold Temperature setting.
PAGE 10
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 10 Day Temperature Setting (Daytime Setback) DISPLAY ACTION D 700A Press MENU key 3 times. UP/DOWN button Time of Day D 636A D 630A UP button DOWN button MENU button Press MENU key once. Daytime Temperature D 70F D 68F UP button DOWN button NOTE First set the time of day for the temperature setback. This is the time when the Daytime Temperature setting will occur. Press UP/DOWN buttons to set the time of day.
PAGE 11
Instruction Manual Coal-trol Digital™ - Model TS2 V3 SETUP Menu Operation DISPLAY SETUP The SETUP menu is for initial setup. Once done, these settings need not be adjusted. Except for the time of day clock, the settings are maintained in the thermostat. ACTION Press and hold the MENU button for 3 seconds until SETUP is shown on the display.
PAGE 12
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 12 MIN/MAX Adjustment The Coal-trol Thermostat uses the values set by MIN and MAX as limits to determine the minimum and maximum fire size allowed on the grate. The factory settings for your stove should be the starting point for any adjustment. The need for large adjustment from the factory default settings may indicate mechanical problems with the stove that will not be solved by MIN/MAX adjustment.
PAGE 13
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 13 ACTION NOTE Extended Menu Operations DISPLAY Press and hold MENU button for 5 seconds. FEED UP or DOWN button Use FEED when manually kindling a fire to help fill and even-out the grate. FEED 10 9,8...1 MENU button The display counts down from 10, once a minute until complete. When complete, the thermostat will revert to the Round-robin display.
PAGE 14
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 14 Room Over-Temperature Cutout DISPLAY HiTemp STOP ACTION NOTE The STATUS indicator light blinks every second. The temperature sensor in the thermostat has detected a room temperature above 97°F/36°C and has disabled all the controlled motors. CAUTION: Before proceeding, investigate the cause of the over-temperature condition. The HI TEMP display may indicate a problem with your stove, chimney, or Coal-trol Digital System.
PAGE 15
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 15 Coal-trol Digital Specifications Note: Automation Correct LLC is constantly working to improve our products. For this reason, all specifications are subject to change without notice. Not all versions include all control options. FOR INDOOR USE ONLY Control Module (CM2-X/PB1/CM1): Electrical: Design Specification: UL-873 Input Power 120VAC 60Hz, 1200W Fuse 10A 125V Fast, (IR10kA/125V), BK/GMA-10A or Equivalent.
PAGE 16
Instruction Manual Coal-trol Digital™ - Model TS2 V3 Page 16 Syracuse • NY www.automationcorrect.com Automation Correct LLC designs and manufactures technology products for home and industry. Combining over 75 years of practical experience, the Engineers and Technicians of Automation Correct LLC are dedicated to supporting our customers with innovative products. Copyright 2004-2008 Automation Correct LLC. All rights reserved.