Instruction manual

GENERAL VIEW
5
GENERAL VIEW
T4x-Series™ Camera
1
Power Indicator LED
2
Power, Serial Interface, and I/O Connector
3
MAC Address label
4
Ethernet Connector
5
Ethernet Network Presence LED
6
Not Used – No Connection
7
Indicator Lights (see page Error! Bookmark not defined.)
8
Reset and Camera Button Event (see page 8)
Configuration
ASSEMBLE THE CAMERA
The first step to perform is to assemble any accessories that make up the T4x-Series™ camera.
A lens must be used. A strobe or other external illuminator may be required.
CAUTION
The camera must be disconnected from the power supply during this
procedure.
1. In a dust-free environment, remove the Camera Lens Cover by unscrewing it.
CAUTION
Do not touch the sensor aperture, lens glass or lens cover glass. These
areas must be kept clean. Avoid any abrasive substances that might
damage these surfaces during cleaning.
1
4
2
5
3
8
7
6