User manual

The following are valid barcode formats for JSN / Part number mode.

Parts Bin Pick Ticket

10020099 10003001.10020099

10020099 3001.0099

0099 10003001.10020099

0099 10003001.0099

10020099 10003001.20099

10020099 03001.099

NOTE: It is required that you use at least 5 digits for the JSN portion of the barcode which would be

99999 jobs before a roll over of job sequence numbers occurs.

NOTE: When using the JSN mode or the JSN/Part number, remember that there will be a JSN Error on

your first scan because no previous numbers are on record. The error should not reappear unless the

JSN scanned is out of order.

*Dual JSN: Check this box if you have 2 (dual) Job Sequence Numbers (JSN). An example of a dual JSN

would be a left and right side part of a car, or a front and rear bumper. This mode cannot be used with the Part

Number mode. If you are error proofing Job Sequence Numbers and you have pairs of parts like a right and left

door, you must check the Dual JSN option. If you don’t check the Dual JSN option and scan two of the same

part numbers in a row, you will receive a Back to Back Parts Bin Error or a Back to Back Part Number Error,

depending on which barcode you scan.

* OPTIONAL, you should only select the item if you need it.