User manual

EP1 terminal doesn’t recognize

My handwriting Continued:

• Make sure you are writing the strokes for letters in the left-

hand side, and the strokes for numbers in the right-hand

side of the Graffiti writing area.

• Make sure that Graffiti is not shifted into extended or

punctuation modes. See the SPT 1700 Series Manual for

more information about shifting into and out of punctuation

modes.

Tapping the screen buttons or icons

does not activate the corresponding

feature:

• Recalibrate the digitizer. Choose Digitizer from the

preferences application pick list and follow the directions

on the screen. See the SPT 1700 Series Manual for more

information on how to access the Preferences application.

• Not all applications have menus. Try changing to a

different application.

Beamed data does not transmit:

• Confirm that the EP1 terminals are 5” apart, the receiver

has its IrDA capability enabled, and that the path between

two devices is clear of obstacles.

Note: You cannot overwrite a .prc file via IrDA if it is

locked.

When receiving beamed data an out of

Memory message appears:

• Your EP1 terminal requires at least twice the amount

of memory available as the data you are receiving. For

example, if you are receiving a 30k file, you must have at

least 60k free.

Your EP1 unit does not read

A barcode:

• Is the EP1 having trouble reading only 1 or 2

barcode types? Check several labels.

• Verify that the setup is correct.