Specifications

14 • C4-1280-GigE Camera Hardware Reference Manual Rev. 1.8
Name Rev. Interface Access Description
immediately after detecting a Gauss falling edge.
Clear the result, if the position value is invalid.
ClearInvalidPos AT IBoolean R/W Enable validation of position value using tolerances
for width and sum of intensity. Perform validation at
the end of scan of image column. Invalid position
values are set to zero in all DCs.
ValidationWidthMin AT IInteger R/W Minimum width of valid intensity distribution in 3D-
mode.
ValidationWidthMax AT IInteger R/W Maximum width of valid intensity distribution in 3D-
mode.
ValidationSumMin AT IInteger R/W Minimum sum of intensity of valid intensity
distribution in 3D-mode.
ValidationSumMax AT IInteger R/W Maximum sum of intensity of valid intensity
distribution in 3D-mode.
CameraControls – ModeAndAlgorithmControls - AoiTracking
Name Rev. Interface Access Description
AoiTrackingEnable AT IBoolean R/W True: AOI-Tracking mode is enabled
False: AOI-Tracking mode is disabled
AoiTrackingMinNumPixel AT IInteger R/W Minimum number of required pixel (one pixel per
column) to start AOI tracking algorithm
AoiTracking_P AT IFloat R/W Proportional gain of PID controller
AoiTracking_I AT IFloat R/W Integral gain of PID controller
AoiTracking_D AT IFloat R/W Derivative gain of PID controller
AoiTrackingUpdateRate AT IInteger R/W Update frequency of tracking algorithm (Hz)
AoiTrackingSensorWriteTimeout AT IInteger R/W AOI tracking senosr write timeout in microseconds
(µs)
CameraControls – ModeAndAlgorithmControls - AoiSearch
Name Rev. Interface Access Description
AoiSearchEnable AT IBoolean R/W True: AOI-Search mode is activated
False: AOI-Search mode is disabled
AoiSearchHeight AT IInteger R/W Height of search AOI
AoiSearchOffsetY AT IInteger R/W Vertical offset from the origin to the search AOI
CameraControls – ModeAndAlgorithmControls - ColumnEvaluationMask
Name Rev. Interface Access Description
ColRangeStart AT IInteger R/W Column start index
ColRangeEnd AT IInteger R/W Column end index
ColRangeEnableCommand AT ICommand W Enable all columns from RangeStart to RangeEnd
ColRangeDisableCommand AT ICommand W Disable all columns from RangeStart to RangeEnd
ColRangeActivate AT ICommand W Activate complete ColumnEvaluationMask and write
data into flash memory
CameraControls – SensorControls
Name Rev. Interface Access Description
SensorFrameCounter AT IInteger R Sensor frame counter.
SensorReadoutTime AT IInteger R Sensor Readout Time in µs.
ExposureTimeAbs AT IInteger R/W Sensor integration time in µs.
FramePeriode AT IInteger R/W Time between two frames in µs.
FrameRate AT IFloat R Frame rate in Hz
ExposureMode AT IEnumeration R Sensor exposure mode:
- Interleaved (the sensor integration and readout
are performed in parallel).
MultipleSlopeMode AT IEnumeration R/W MultipleSlope Mode:
- SingleSlope
- DualSlope
- TripleSlope
DualSlopeTime AT IInteger R/W DualSlopeTime in % of sensor integration time
TripleSlopeTime AT IInteger R/W TripleSlopeTime in % of sensor integration time
NumberOfNDRFrames AT IInteger R/W Number of NDR frames