Setup guide

Safety Precautions
CAUTION: SHUT OFF YOUR TOUCH SCREEN BEFORE CLEANING!!
IF YOUR DISPLAY IS A –TS MODEL, THAT IS A TOUCH SCREEN DISPLAY,
THE SCREEN WILL BE ACTUATED BY CLEANING. PRESSING ON THE
SCREEN WHILE CLEANING WILL BE SEEN AS A TOUCH TO THE SYSTEM
WHICH COULD CREATE A POTENTIALLY DANGEROUS CONDITION!!
 Do not attempt to service this display yourself. The rear chassis has a seal so
that non qualified personal will not expose themselves to dangerous voltages or
other risks.
 To protect from electrical shock, unplug the display power supply from the wall
before moving.
 Do not use this display near water
 Do not place any heavy objects on the power cords. Damage may cause
electrical shock.
 Unplug the power supply from the wall or unit if one of the following conditions
exists.
o Power cord or plug is damaged or frayed
o Liquid is spilled into the display or the display is exposed to rain or water.
o The display does not operate normally when the operating instructions
are followed.
o The display has been dropped or the enclosure has been damaged.
o
The display exhibits a distinct change in performance, indicating a need
for service.
 Ensure that sufficient space is available around the display to provide air
circulation for cooling.

Ensure that the ambient air temperature will not exceed the specified maximum
temperature.

Do not expose the display to direct sunlight or heat.