User guide

Touch Screen Driver Installation for Windows 98
Required items to know or have to install the Touch Driver.
 What Operating System you are using. Windows 98
 What Serial Port you are connected to. Usually COM 1 or COM 2
 The type of touch screen. Smartset
 The CD-ROM or Floppy disk included with the system.
Touch Screen Driver Installation for Windows 98
 Insert the provided CD
 Select Link to the Windows 98 driver
 Select Open from the Windows dialog box.
 Select SmartSet Controller for Com1 or Com2
 Remove the CD.
 Restart the computer; you will be prompted to calibrate the touch screen.
 Touch each of the 3 targets as directed. If the unit does not respond to
your calibration touches then you have probably selected the wrong
COM port. If so, reinstall the driver and selecting the correct COM port.
 You are now ready to use your touch screen.
Note 1: The touch screen calibration information is maintained in the computer. If you
change computers, you will need to reinstall the touch screen driver software and
recalibrate.
Note 2: If for any reason the touch screen performance is unsatisfactory, you can
recalibrate at any time. This is done from the ELO icon under the Windows control panel