Service manual

Install input devices
Installing optional Tray 3
1. Turn off the power switch on the printer.
2. Unplug the power cable.
3. Place the printer on optional Tray 3, aligning the three (3) pegs on Tray 3 with the holes on the
printer.
Loading Tray 1
Tray 1 (the single sheet priority feed slot) prints single sheets of print media or a single envelope.
Use Tray 1 when feeding one sheet of paper, or one envelope, postcard, label, HP LaserJet glossy
paper, HP LaserJet Photo paper, or transparency. You can also use Tray 1 to print the first page on
different media than the rest of the document.
ENWW Install input devices 23