User's Manual

U.S. Patent No. 8,856,780
01
[4x]
02
ENGINE
START
STOP
OFF ACC ON START
ON
03
04
05
06
07
08
ENGINE
START
STOP
OFF ACC ON STARTOFF
09
_________________________________
>>
F
_________________________________
REMOTE PROGRAMMING PROCEDURE - 1 OF 1
WARNING: Complete the module
programming procedure and tach
programming procedure before programming
the remotes. A maximum of four [4x] remotes
per system.
Set ignition to ON position.
Press and release the antenna button, then
press and hold the antenna button. The
antenna’s leds will turn solid BLUE.
Parking Light will fl ash once [1x].
Press once [1x] on the LOCK button of each
remote.
The antenna’s leds will fl ash BLUE once [1x]
for each successful pairing.
Release the antenna button. The antenna’s
leds will turn OFF.
Set ignition to OFF position.
Remote Programming Procedure completed.
To program an additional remote as second
vehicle mode: Follow steps 1 to 4. Press twice
[2x] on the “F” button then press once [1x] on
the LOCK but
ton of the remote. Follow steps
6 to 9.
www.idatalink.comAutomotive Data Solutions Inc. © 2015 iDatastart VWX
PAGE 6 OF 14
• 20151023