User's Manual

SRR2-A / BSM Users Manual
C PSAD A D F6
Filename: SRR2-A Exhibit 1 - User_Manual_V11.doc
Issue status: 1.1 Document maturity: released
Department: C PSAD A D F6
page
9 of 13
Copyright 

 by Continental 2010
All rights reserved
6 SRR2-A sensor software operation
Only one operational mode exists which does radar measurements with FM frequency modulation. The sensor
operates in this mode during the complete lifetime in the host car.
The sensor SW of the test sensors for type approval is configured in such a way that the sensor enters its
operational mode once a 12 V battery supply is applied to the supply pin and 0V of the battery is applied to the
GND pin. No CAN message protocol or diagnostic handshake protocol is necessary in this special mode.