In-Car Router © 2008 Autonet Mobile Inc.
Safety Precautions The Autonet Mobile installation instructions must be followed to minimize potential interference with other electronics on the vehicle. WARNING To prevent injury or fire, take the following precautions: • When extending the ignition, battery, or ground wires, make sure to use automotive grade wires or other wires with a diameter of Xmm (AWG 16) or more to prevent wire deterioration and damage to the wire coating.
FCC WARNING FCC Compliance Statement Exposure to Radio Frequency Signals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
. Connect the ground wire (Black wire) to a metal part of the car chassis that acts as an electrical ground passing electricity to the battery’s negative terminal. 5. When the In-Car Router is initially powered up, the blue LED on top of the In-Car Router will come on for a few seconds. 6.