Streaming Soundbar Active Streaming Soundbar with Optional Subwoofer AU-SNBR-2.
Table of Contents Introduction...................................................................................................................................................................................................8 New Dealers - What to know .................................................................................................................................................................8 Important Tools and Resources .................................................................
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. ! The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. not be exposed to excessive heat such as sunshine, fire or the like. WARNING: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
This Class B digital apparatus complies with Canadian ICES003. CAN ICES-3 (B)/NMB-3(B) 15. L’appareil : ne doit pas être exposé à un égouttement ou à WIRELESS TRANSMITTER COMPLIANCE INFORMATION 16. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. 17. 18. This device complies with part 15 of the FCC Rules and the applicable Industry Canada license-exempt RSS standard(s).
For North American Models Avis du Canada, Innovation, Sciences et Développement économique Canada (ISED) FCC interference statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Introduction New Dealers - What to know Thank you for purchasing the Autonomic Streaming Soundbar! We strongly recommend performing setup and configuration prior to installing at the customer site. This is especially important if this is your first time working with the product. Please retain this manual for future reference.
• Use the soundbars HDMI output to display Now Playing Information for streaming audio. • Access an online library of tens of thousands of albums with Amazon Music, Napster®, Spotify or Slacker Premium. • Access SiriusXM and SiriusXM Music for Business online without installing an antenna. • Create custom radio stations via Pandora or Slacker Radio. • Browse thousands of AM and FM radio broadcasts around the world using TuneIn Internet Radio service. • Synchronize with Apple iCloud.
Soundbar (Rear) A C B D E F ANALOG IN 2 HDMI OUT USB G H DIGITAL IN 1 DC IN COAX 24V 2.5A 60W I J IR IN ETHERNET R L A. HDMI Out F. Autonomic on-screen display for Now Playing content B. USB Port Digital optical input. Dolby Digital formats will be decoded G. To connect an external hard drive for additional storage C. Ethernet Port H. DC IN Power Port Power cord connection Factory reset I. IR IN Port J.
Remote A. C. E. Power Toggle: Toggles Power Mode between On and Standby B. EQ Toggle: Toggles Subwoofer between On and Off C Power Off: TuneBridge and Amplifier in standby mode (if applicable). All other input is inactive. Unpaired: Subwoofer absent or unpaired via wireless sub module. EQ optimized for use without subwoofer. F Preset A D. Preset C Short Press: Selects the TuneBridge input of the Soundbar and recalls TuneBridge Preset A.
Install Soundbar Placement Placement should be below a flat screen TV on a cabinet top or shelf near a network connection for most applications. Other options for placement include on-wall using the included bracket, or attached to a flat panel mount using the optional Strong mount bracket. Installing On or In a Cabinet On Cabinet In Cabinet Note: When placing the soundbar on a cabinet shelf, the front edge of the speaker should be flush with the front of the shelf.
Connect To use Autonomic's eAudioCast (distributing audio around the network) the soundbar must be hardwired into the Network. eAudioCast can be used for playing back sources on other autonomic amplifiers on the soundbar or for distributing sources plugged into the soundbar in the rest of a larger autonomic system. For cases where the soundbar is being used without the use of eAudioCast, WiFi can be used. Connecting all the wires and components See below for a basic connection diagram.
Bluetooth Pairing 1. Use the soundbar remote or front panel control to select the bluetooth input. 2. If the soundbar is paired to an existing device, the blue light will be solid. If blinking, it is ready for pairing. 3. Access the bluetooth pairing menu on the device to be paired to the soundbar by pressing the bluetooth button. 4. Select the Soundbar (AU-SNDBR) 5. To re-enter pairing mode, disconnect the currently paired device. NOTE: Changing inputs requires device reconnection.
Claim Device on OvrC To claim the device on OvrC: 1. Connect to your customer's network. 2. Go to www.OvrC.com. 3. Log in to your account or create an account. 4. Create the customer by clicking Add Customer and input the customer's information. 5. Click +Device and enter the MAC Address and Serial Number for the device to claim the device. 6. Claim all other devices on the network. Connect Devices Discover and Update Devices 1. Go to setup.tunebridge.com.
Add Services 1. Go to setup.tunebridge.com and click on the Config link next to your streamer. 2. Go to the Content Tab. 3. Scroll down to the Online Credentials section. 4. Click the gear beside the service you want to add and select Add Account. 5. Follow the prompts to login to your service account. Note: Ensure pop-ups are not blocked as some services require a pop-up window. Name Zones 1. Go to setup.tunebridge.com and click on the Config link next to your streamer. 2.
Control System Integration The Soundbar Media Soundbar is designed to work seamlessly in an automated home environment. Autonomic works closely with all leading control system manufacturers to ensure the smoothest operation and access to all features of the Soundbar on control system touch panels or automation applications.
Specifications AU-SNBR-2.0-BLK Streaming Services Deezer, iHeartRadio, Murfie, Napster, PANDORA® Internet Radio, SiriusXM Internet Radio, Slacker Radio, Spotify, TIDAL, TuneIn, AirPlay, Amazon Music High Resolution Output Audio Formats .aif, .aifc, .aiff, .au, .cda, .flac, .m4a, .m4p, .mp2, .mp3, .mpa, .rmi, .snd, .wav, .wma, .wpl As with the premium music servers in the lineup, the AU-SNBR-2.0-BLK supports full High Resolution Audio (HRA) at 24bit/192kHz.