Operating instructions
12
MirageAudioSystem.com
FIG 2.
MULTIPLE AMPLIFIER STACkS
Linking to the next M-800 or M-400 Multi-Zone Amplier
In large installations where multiple M-800 ampliers are required,
the expansion bus may be used to convey inter-amplier control, and
common IR control.
The source equipment audio inputs must be plugged into the rst
amplier where they are buffered and sent to the next amplier in the
stack. The maximum recommended expansion is twelve units.
Fig 2 shows inter-connected ampliers using an RJ45 expansion bus
lead, and RCA leads for the source digital coax signals.
Amplier control using ethernet, RS232 or USB may be connected to
any one of the M-800’s in the stack.
Mirage Media Server
Satellite Receiver
Tuner
CD Player