Operating instructions

FIG 3.

FIG 4.

CONTROLLER WIRING

The M-800 is packed with control options:

» USB:

Intended for initial installation Programming or firmware

update. Not intended for permanent connection to a PC or

other control system.

» ETHERNET:

100BaseT connection to a home network router or switch.

» RS232 Serial:

Electrically isolated prevents hum in analog input circuits.

» CONTROLLERS:

Conveys +12VDC, IR and data between the M-800 and KP-1

keypad controllers, connected using

CAT5 cables.

» BUS RUN:

For future use.

» TRIGGERS:

+12VDC 100mA trigger output when a

zone is on.

» EXPANSION BUS:

Simple patch cable interconnection for Autonomic Amplifiers

that conveys control and data between Amplifiers in a stack.

(Fig. 4)