Operating instructions

17
Copyright © 2013 Autonomic Controls, Inc. All Rights Reserved
SYSTEM SETTINGS
TEMPERATURE 35°C (45°C PEAK)
SET CLOCK
RESTORE
DEFAULTS
SOURCES
NETWORK
CLOSE
CLOCK SETTINGS
3:00:25 PM
WED 04/05/2013
INTERNET TIME /
TIME ZONE
MODE
-
+
24 HOUR
TIME
DATE
FORMAT
Set Clock Page
The clocks time and time zone is automatically synchronized when
connected to the internet or to a PC using the USB connection.
However, the clock settings and how the clock is displayed
may be adjusted.
Select the Back arrow to return to the System Settings page.
+
-
SELECT
OK
ZONE LINKING
LINKED ZONES: NONE
LINK
VOLUME
LINK
STANDBY
System Page
The System Settings page opens when the System button is selected in
any of the “More Function” pages for longer than 5 seconds.
The system settings are Zone independent functions.
The internal amplier heatsink temperature is displayed at the bottom
of the page.
Select the Close button to return to the Zone page.
Zone Linking
The Zone may be linked with any other zone or zones. Make the
selection by scrolling through the zone list and choosing OK.
The Type of Zone Linking:
» Link Volume or Link Standby may be selected.
» When Link volume is selected the linked zone(s) will track the
source and volume settings.
» When Link Standby is selected the Linked Zone(s) will behave
as if they are the same zone.
» Once entered, select the back arrow to return to the Zones
Setup Page.