Operating instructions

29
Copyright © 2013 Autonomic Controls, Inc. All Rights Reserved
SPECIFICATIONS
Amplier Section
Rated Output Power (FTC)
All Channels ...................................................................................... 50 Watts / channel, 8Ω loads,
THD (Total Harmonic Distortion) ................................................. 0.1% (40 Watt, 8Ω load)
Speaker Impedance (Z1 – Z6 L/R) ................................................ 4Ω - 8Ω
Input Sensitivity and Impedance
(S1 – S6 L/R) ....................................................................................... 0.72 V / 22KΩ (Unbalanced)
Coax digital input level and Impedance ................................... 0.5V ± 0.05V / 75Ω
Preamplier Output Level
and Impedance ( Z7 & Z8 L/R) .......................................................+16dB / 470Ω
Frequency Response ........................................................................20Hz – 20 KHz / – 3dB (8Ω)
Tone Control........................................................................................ ±12dB, 100 Hz (Bass)
±12dB, 10 KHz (Treble)
Signal to Noise Ratio .......................................................................100dB (IHA-A, 1V input / unbalanced)
Interface
IR Output ............................................................................................ Ten 3.5mm Jack: IR1 – IR10 current limited to 25mA.
Expansion Bus ................................................................................... One Dual RJ45 Socket: Control I/O, Summed IR.
Ethernet .............................................................................................. One Shielded RJ45 socket – 100Base T
RS232 ................................................................................................... One Isolated DB9 – 9600 Baud
USB ....................................................................................................... One USB mini-B 5 pin
Controller ........................................................................................... One: 4 way terminal blocks (0V, IR, 12V & Data).
Amp On & PG Control ..................................................................... One: 10 way terminal plug with Amp ON 1 – 8
contact closure inputs: PG1 & PG2.
General
Power Supply .................................................................................... 110 – 240VAC 50/60 HZ
Power Consumption ....................................................................... 320 W
Standby Power Consumption ...................................................... 6W
Dimensions ........................................................................................ 435 х 90 х 390 mm
Height including feet ..................................................................... 105mm
Weight ................................................................................................ 7Kg
Specications and features are subject to change without notice.