Operating instructions

Zone Linking

A zone may be programmed to link multiple zones. Zone linking ties

the source selection together. It may also tie the volume and standby.

This is useful for closely coupled audio areas where it is advantageous

to have different volume control but the same source, or the same

volume with separate standby control. Zone linking is setup via the

web cong.

96 Zones

There are 96 zones of possible control. On an M-400 amplier each

zone must be different, however in a multiple amplier stack, same

zone ampliers are possible (they simply mimic every parameter).

Power Failure Restoration

After an AC power outage the M-400 amplier restores its settings to

the pre-interrupted state. All internal settings are stored in non-volatile

memory, except the clock that runs for at least 48 hours on stored

power.

Firmware Upgradable

The M-400 amplier may be updated with the latest operational

rmware. See www.Autonomic-Controls.com for support.