User Guide

1. Place the magnetic charge
dock on the charge dock icon side of the purple tile
and line up the dock and tile.
2. Place the optional Kai-Tiles on this
side of the purple dock tile. The purple dock tile
only connects on either the left or right-hand side of
a blue Kai-Tiles .
3. Ensure the Charge Dock is powered and the green
LED light on the charging dock is on.
4. Drive or place KaiBot onto the purple charge tile
and if KaiBots battery is low, it will kick into
autonomous charge mode and will automatically
drive onto the charging dock.
📘 Note: If the charging dock does not have power
(green LED) then KaiBot will fail to dock.
📘 Note: If the charging dock is not aligned correctly to
the purple tile, then KaiBot might fail to dock correctly.
📘 Note: Magnets located inside the dock, purple
charge tile and Kai-Tiles should help align up, but you
might have to correct it slightly for better docking.
New Zealand
launches rockets into
space?
New Zealand firm Rocket Labs launched satellites
into orbit from its own private launchpad on New
Zealand's Mahia Peninsula.
24