User Guide

Basic Coding Card Explainer
The following describes what each card does and how they interact with each other. The below describes
the Standard Coding Card Pack.
CONTROL CARDS
This is your goto card to start your program! KaiBot must read this card first.
And like all goods stories, they all must come to an end! Make sure you end your
program with this card. If you have KaiBot paired with Kainundrum.com , then your
coding card program is converted to both Blockly and text based Python code!
KaiBot loves this card! Once you tap KaiBot on the Run Program card, you have a
3-second countdown before KaiBot runs your assembled program.
Tip: Make sure KaiBot is facing the correct way. The yellow switch is his rear.
This card cannot be used inside your program.
If KaiBot needs to be stopped in his tracks, pick him up and place him on this card to
stop your program from running. You can run the same stored program again, by
placing KaiBot on the Run Program card again.
This card cannot be used inside your program.
28