User Guide

You can view your robot's current coordinate, both on the robot screen and also in Kainundrum.com in the
3D virtual view, use the top info bar to see the current tile number, angle, x & y coordinate.
💡 Tip: If you place KaiBot in the middle of a Kai-Tile, the y
position will be out by about 8 points. This is correct as indicated in
the diagram in red. Offsetting KaiBot and placing the KaiBot
camera over the centre of the tile will result in a 0 x & 0 y position
on a Kai-Tile.
Kai-Tiles in the Classroom
✋ Stop: It is highly recommended to always pack away your
Kai-Tiles in numerical order as this will dramatically help when it
comes to building a tile layout in numerical sequence the next time
you use them.
Design & build a Kai-Tile layout
If you are planning to use Kai-Tiles alongside Kainundrum, then just like planning to
design & build a house always start with designing your floor plan.
The floor plan design should be created in the Kainundrum game editor tile builder.
Once you’ve built the virtual floor plan, match the same layout and sequence with
your physical Kai-Tiles.
💡 Tip: Only build the virtual tile numbers that match with the physical
Kai-Tiles numbers you have.
47