C3-RS-665-2W PROFESSIONAL TWO WAY REMOTE CAR STARTER & 3 CHANNEL SECURITY SYSTEM OPERATIONS MANUAL Compatible Please register your product at: www.autopageusa.
SYSTEM OPERATIONS: WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. 2. 3. 4. 5. 6. 7. Keep the transmitter out of children’s reach. Do not leave anyone in the vehicle while running on remote control. Alert servicing personnel that the vehicle can be started automatically. Do not start the vehicle by remote while it’s in an enclosed area or garage.
II Switching code For 2nd Car Operation. For regular remote transmitter Only XT-43 LCD TRANSMITTER OPERATION: LCD REMOTE CONTROL TRANSMITTER: Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. BATTERY REPLACEMENT: A 1.5V type AAA Alkaline battery powers the Remote Transmitter.
times when the battery compartment is empty, and then insert the new battery. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked. Door Unlock Your vehicle doors are unlocked Start Mode Your vehicle is running Valet Mode Remote Transmission You are transmitting the signal to control unit In – Range Indicator You are within the remote control range. Low Battery All the function shall be temporarily on hold. Trunk Release Trunk open. Trunk symbol only.
one long beep is heard. LCD Programming has now been entered. Transceiver Button System Function Remark Switching code for 2nd / 1st Press within 5 Program Mode Car Operation seconds Melody / Vibration Mode Press within 5 Program Mode seconds Power Save Mode Press within 5 Program Mode seconds LCD screen lamp turns on for 5 seconds. Clear the Flash Icon and Press within 3 + Melody Sound seconds ACTIVE LOCK: 1. Press button on the transmitter. 2.
1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. LCD Programming has now been entered. 2. Within 5 seconds press and hold button until two beeping sounds are heard and the “II” icon will display on the LCD screen to indicate the second transceiver pin code has been initiated. 3. To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited.
exited. Power Save Mode: While in the power save mode, the LCD remote transceiver will “sleep” until a button is pushed. This will extend the life of battery. When power save mode is “ON”, the remote control will wake up periodically to check for messages from the security module. 1. Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been entered. 2. Within 5 seconds, press the button to toggle “On” or “Off”.
While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the LCD remote transmitter to stop the melody sound. PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED) The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency. 1.Press and hold the button for 3 second. The siren will immediately sound. 2.During panic mode, the normal function of this transmitter button will be suspended.
Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the engine running and the climate control on. 1. Before turning off the engine, press the button once on the transmitter.
SILENT ARMING / DISARMING: Pressing the + buttons together on the transmitter will arm or disarm your system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the button once: The siren chirps once, The system is armed.
return to normal status. ACTIVE UNLOCK & DISARMING: 1. Press button on the transmitter. 2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now disarmed. The vehicle doors will unlock and dome lights will turn on for 30 seconds. TAMPER DISARMING: If the alarm was triggered in your absence, upon disarming the system, the siren will chirp 4 times, the parking lights will flash 3 times.
PARKING LIGHTS: 1. Arming Siren / Horn 1 or 3 Chirps Parking Light LED Doors 1 Flash Slow Flash Locking 2. Disarming 2 or 4 Chirps 2 or 3 Flashes 3. Trigger 4. Panic Alarming Alarming Flashes Flashes 5. Car Locator 6 Chirps 12 Flashes Starter Disable Unlocking Slow Flash Disable Dome Light Turns on for 30 -second Flashes Flashes Locking AUTOMATIC RE-ARM If this feature is selected, the security system will automatically re-arm itself 60 seconds after disarming with remote transmitter.
indicating the system has exited the valet mode. PANIC FUNCTION: The transmitter can be used as a remote panic switch to manually trigger the vehicle’s siren / horn in case of emergency. 1.Press and hold the button for 3 second. The siren / horn will immediately sound. 2.During panic mode, the normal function of this transmitter button will be suspended.
is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. TRUNK RELEASE Press and hold the button on transmitter for two seconds to remote control the trunk release or other electric devices. CAR LOCATOR Press the button once with armed mode to active car locator function. The horn will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car.
(SAFETY START OPERATION:) The safety start feature allows you to press the vehicle will remote start or remote shut down. button Twice before the NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions exists: 1. The hood is opened. 2. The brake pedal is pressed. 3. Move the optional remote start enable toggle switch to OFF position. (If installed) 4.
IMPORTANT: Timer Start should be used only in open areas, Never start and run the vehicle in on enclosed space as a garage or carport. 3 hours timer start: This feature is design for an extreme cold climate usage. The system will auto start the vehicle every 3 hours, to prevent engine freezing and hard to start. A MAXIMUM OF SIX CYCLES CAN OCCUR. ENTER: 1. Press the button once to remote start the vehicle. As soon as the vehicle is running and the parking lights have turned ‘ON’. 2.
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
8. Auto Page shall not be liable, under the foregoing WARRANTIES or otherwise, for: Any personal injury of any kind to the purchaser, its employees or agents or anyone else whomsoever resulting directly or indirectly from the use or presence of the equipment or parts; Consequential damages of any kind; any inability of the purchaser to use the equipment.
serious threat to human health and water resources.“Perchlorate Material – Special handling may apply.” For more information, go to http://www.dtsc.ca.
960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.