Manual

10
LOADING
The scissors lifts have the load capacity rating stamped on a metal plate attached on
one side of the lift. This figure is a net capacity rating for a lift furnished with the
standard platform. In the event that gravity-roll sections, special tops, etc., are installed
on the lift after leaving the plant, deduct the weight of these from the load rating to
obtain the net capacity. Damage may result if the lifts are overloaded beyond the
established capacity
UNBALANCED LOADING
The stabilization provided is basically for balanced loads. Due to the fact that the lift is
designed to operate without having to be lagged to the floor, special attachments that
extend beyond the length and/or width dimensions of the platform should be avoided.
This will prevent unintentional tipping of the lift that could lead to damage of the
equipment or personal injury.
Model # Travel
Capacity
(Max
Lbs.)
Base
Frame
Size
Platform
Sizes
Lowered
Height
Raised
Height
Under
clearance for
Pallet Jack
No. Of
Airbags
Max.
Operating
Pressure
Shipping
Weight
(pounds)
24AF25-1 24” 2,500 36 x 48” 36 x 48” 9.5” 33.5” 3.38 1 80 psi 820
24AF25-2 24” 2,500 36 x 48” 48 X 48” 9.5” 33.5” 3.38 1 80 psi 860
24AF25-3 24” 2,500 36 x 48” 48 X 54” 9.5” 33.5” 3.38 1 80 psi 880
24AF25-4 24” 2,500 36 x 48” 48 X 60” 9.5” 33.5” 3.38 1 80 psi 900
24AF50-1 24” 5,000 36 x 48” 48 X 48” 9.5” 33.5” 3.38 2 80 psi 880
24AF50-2 24” 5,000 36 x 48” 48 X 54” 9.5” 33.5” 3.38 2 80 psi 900
24AF50-3 24” 5,000 36 x 48” 48 X 60” 9.5” 33.5” 3.38 2 80 psi 920
SPECIFICATIONS