Manual

15
DANGER !
If for any reason you are unable to lower the lift completely onto the
maintenance device(s), stop immediately and consult the factory.
Failure to properly use the factory approved maintenance device(s)
could result in severe injury or death.
5. Once the maintenance devices are properly and securely engaged, continue to
press the down button, valve or switch for an additional 5-10 seconds to relieve
all pressure in the hydraulic system (it could take longer in a pneumatic system).
WARNING !
Failure to relieve operating system pressure could result in the
sudden and unexpected release of high pressure fluids (or air) during
maintenance and/or repair of the lift and result in severe injury or
death.
6. Follow OSHA electrical lock-out/tag-out procedures. Disconnect and tag all
electrical and/or other power sources to prevent an unplanned or unexpected
actuation of the lift.
7. Once inspection or work is complete, reverse the performance of the steps
above to raise the lift off the maintenance devices and flip the devices back into
their designated storage positions outside the base frame.
DANGER !
HIGH VOLTAGE!! – Disconnect and/or lock out the electrical supply to
the power unit prior to any installation or maintenance being
performed.
LIFT BLOCKING INSTRUCTIONS