Manual

6
DANGER!
Extending the platform length or width beyond the factory limit could cause
the unit to tip, which could result in personal injury or death.
DANGER!
Do not attempt to remove the velocity fuse until the maintenance locks
securely support the lift and all hydraulic pressure has been removed from
the lifting cylinders and hydraulic hoses. Failure to do so could result in
personal injury or death!
WARNING!
Under no circumstances should the speed control orifice be removed from
the Deltatrol to obtain faster lowering speed. A loaded lift can reach
dangerous and destructive speed!!
WARNING!
All warning and information decals should be in place as outlined in the
“Label Identification” section. If decals are missing or damaged, they
should be replaced with new ones. Contact an Autoquip representative for
replacements.
SAFETY PRACTICES